Good to know it still works after 4 years

It works very good.

Yes, its just a pulse, because there is no way to tell how long a toggle button on the remote controller is pressed. You can add your own delay if you want to.

how does the push mode for the hotkeys work? is it just a pulse?

Thanks

Fixed hotkey toggle state changing when reconnecting, if the remote controller's hotkey was toggled while it was disconnected. This made at least one person happy after waiting for a year since asking me to fix it.

I forgot to say there are no key press and release events as you call them, there is only a toggle event. The toggle state changes on key press.

You have to implement momentary with your own logic, this can be done with a delay.

It is not possible to get how long the hotkey is held down, because it is toggle on the controller and I can only notice the change from off to on or on to off again. I decided not to implement the delay myself because it is not a perfect solution and can feel weird to the user.

Only the 4 axis can be push if you set them to 100% and use threshold gates, like you probably have done.

Hope that helps!

How hard would it be to add a third mode to the hot keys for momentary?

I looked in the LUA code and its way beyond me, I also considered how to modify the output with my own micro-controller, but I effectively need a key press and key release event to do it.

The reason I ask is I want to use this as remote for a rather complex crane which uses fourteen buttons to work, four groups of winches, two of those groups also have a pair of buttons for synchronised operation and two liner sliders.

I can convert the WASD / Arrow keys to momentary using threshold gates, but I'm stuck with the hotkeys being either toggle on, or a single pulse.

Glad you like it!

This is great and so simple to implement into a system!

oh ok

You have to make your own microcontroller that converts the outputs you want from composite. Or find one on the workshop if you dont know how.

how do i make my weapon trigger if the radio doesnt have an On/off

No problem, glad its still working :P

This is great for my watercannon!
Thanks!

No problem, good to know :)

Thanks alot! Used it in my crane too. Works fortune!

@OmiCron I've added the trigger hotkey, but keep in mind the note in the description.

Updated: Improved axis press detection and included trigger hotkey.

Oh, didn't know they added that to the remote controller, I can probably add it this week.

Will you add the trigger button (space) ? It is the channel 31.

No problem :)

I converted signals and used it with my crane, works great. Thank you!

Works perfectly!

The input on the microcontroller is connected to the output of a radio antenna, the output on the microcontroller has to be converted from composite to the logic you want to use.

Where Does Output Logic Go? Input Logic I Guess Goes To Seat?

No problem, glad it helped you :D

Thanks so much for taking the time to make this. With it, the remotes are actually useful and my stuff is now functional. Cheers!

Oh yea, idk

in the chat that happend

something happened?

what just happend?

Turns out it isn't garbage

Not good

And how is that working out for you

I am here to dispose of this garbage

Why dont you go allocate some waste somewhere else, robot

ok boomer