Space Engineers

Space Engineers

Power Transmitters
648 opmerkingen
HappySpaceJumper 30 jun om 20:00 
cant get it to work transmitters doesent find other transmitters
Ashmunduth 11 jun om 19:36 
hi everytime i switch the power converter on it switch automatically on off by itselft i know what am i missing i have tried everything (putting it near the power remote receiver, put it in another grid with another receiver, put it one in the receiver grid and another in the sender ecc ecc ). Any help will be appreciated
xdevourx 7 jun om 15:45 
Not Sure what these other buys are talking about. I just tested this mod and its working as intended. The description tells you to use this naming scheme but in the control panel there are toggles and fields where you can enter the desired values to setup the transmitters up.
jamstraz 23 apr om 8:00 
Invisible model??
Cy Arcturus 18 sep 2023 om 13:46 
Is it actually not working or is it just not updated to the latest version and throwing warnings because of that? I know that's a common issue with mods for games that are updated quite regularly.
MrAnti 4 sep 2023 om 12:22 
Hello, (Google Translator)

mod is outdated and no longer works. One can only hope that the mod developer will want to upgrade it again at some point. Or hope someone adopts this mod and upgrades. Is a very good mod.

See You.
Insanity 3 mei 2023 om 9:24 
I got the radial version to work fine.
The optical version seems to work for a moment, then stops.
Isaac Clark 28 apr 2023 om 8:19 
Would love to know how you got this to work. I have been fidgeting with it for hours to no avail.
Duster71 22 apr 2023 om 7:43 
Love this, took some doing to figure out but got it to work.
TheKing 21 26 mrt 2023 om 0:51 
did he stop the mod?
FMHikari 23 feb 2023 om 12:24 
Not working properly, and quite complex to set up. Remote Receiver not working.
Oh, and your grids also need separate power sources, as you can't just send power without at least a single battery.
TheKing 21 29 jan 2023 om 5:38 
Yeah its not working for me too
=Longhooter= 28 jan 2023 om 13:08 
having issues where im trying to connect one optical transmitter to multiple receivers only to have to keep quick saving and reloading to see if they even work just to find out that they dont want to connect at the same time and show 0 connections even though its sending power please fix as its a good mod idea and the only other is power-lines which are fiddly to use as its not very good with multiple point defence towers
Dr Snipanippleoff 2 jan 2023 om 23:50 
So I have an interesting "issue" i guess

The remote power converter is cycling on and off rapidly.....Not sure why
Jedul 19 nov 2022 om 13:14 
It's not working?
BIV 25 sep 2022 om 13:28 
I'm definitely going to watch this mod to it's fruition, Being able to recharge batteries on rovers, ships and drones without having to run conveyors andconnectors to each one will be heaven. ust build a multi-story parking building with 'powered' park slots for each vehicle. Old Tesla would be so happy to see his ideas working (well, playing games about working but...) Great work mate.
hampson.jeffrey 30 aug 2022 om 20:13 
OK, Got this sorted!
Turns out I just needed to save my game, and reload to get everything to play nicely.

FYI, Turret style aiming is not required, they work like Laser Antennas.
One Receiver can receive from multiple Senders.
You can have both senders and receivers on the same grid.
If you set up everything and get "Status: Connected and Visible" but no power coming through, just save and reload your game.
FallenSunGaming 29 aug 2022 om 12:56 
Make sure you own both stations Hampson. I've noticed I get issues with ownership on them. Sometimes you have to just rebuild both sides due to connection issues. it's tough because the bugs are always random.
DrBossWatson 8 aug 2022 om 8:17 
Will this let me use a set of optical transmitters for sending power from my station to my base, and then another set to send power back to the station to effectively share the power grids of both? Looking to supplement my base's power with solar arrays but those arrays will potentially need to call on the base for powering shields.
Democracy Manifest 14 jun 2022 om 6:51 
@bystander Thank you so much bruv. In case it gets forgotten,i will copy paste so everyone can see.

This mod does still work. As Abdul099 pointed out the receivers don't appear to update their text, but if you have configured it correctly the Remote Power Converter will show power coming in.
Simple instructions: Add a power transmitter to both grids, plus add a remote power converter to the receiving grid. Configure the transmitters by adding text in {} to the name, the power converters don't need configuring. E.g.
Radial sending Transmitter add: (C:1,P:50,M:S)
Radial receiving Transmitter add: (C:1)
Optical sending Transmitter add: (T:1,P:50,M:S)
Optical receiving Transmitter add: (I:1)
Toggle them off/on after changing the values.
Dunkin' Deeznutz™ 29 mei 2022 om 10:57 
Ok, I was going to write saying this mod seems broken, but I think I finally figured out the issue.
It seems you NEED to have a Power Converter on the receiving grid.
I threw one of those down and it started working, although the transmitter on the receiving grid says it is getting 0 from the sender, the converter is registering the received energy.
So my mobile solar array using Isys gyroscope sun tracking seems to be functioning now.
Side note, even though this page, and the notes on the block config screen still say to do it, I found it to be functional without adding tags to the name, just fill out the form in the control panel.
DontFollowOrders 3 mei 2022 om 13:44 
I love Cython's mods
Storm Plooper 25 apr 2022 om 10:09 
Does this mod still work? I setup a solar panel array that is producing well over 50MW of power (using this mod, which already has these in place https://steamproxy.net/sharedfiles/filedetails/?id=651004624&searchtext=Solar+Panels) and then put a receiver on my base along with a remote power converter. I have the tags in the names correct (sender = (T:2, P:10, M:S) and receiver = (I:2) and the sender says the following:
(M)ode: Sender
(T)arget ID: 2
Status: Connected and Visible
(P)ower sent: 50.00MW / 50.00MW

But on the receiver, I get:
(M)ode: Receiver
(I)D: 2

Power Receiving: 0.00MW / 50.00MW
Number of Sources: 0

I don't know what I'm doing wrong. I will note, I have this running on my hosted server, so maybe that is the issue? Any help you can provide would be GREATLY appreciated.
Star 4 mrt 2022 om 13:48 
been messing with this for about an hour and I cannot get the any of them to connect as a receiver. When its in send mode it tells me 1 receiver available yet when I go over to the other one it says 0 source available. All of them are set to channel 1 and I've tried it with and without the stuff in the name. Just going to assume its broken and delete it
Syna 26 feb 2022 om 15:44 
The remote power converter keep switching between on and off.
Geck0 25 feb 2022 om 17:50 
Loving this mod for my drones. Getting away with minimal batteries and no cockpit or seat, can still run them perfectly.
But I noticed that radial transmitters will frequently temporarily turn off? I've had to use batteries to avoid the brown outs, as it'll power for a second, then turn off for a split second, repeated
Klous 23 feb 2022 om 18:43 
@deadpoop best I can tell none of the tags are required, enter your channel and power in the block terminal and you're done.
Erikan39 22 feb 2022 om 4:30 
Would love to see longer range for optical transformer, otherwise, great mod! :D
Dysfunctional 7 feb 2022 om 17:57 
This is great, Liked and Subscribed!
BIV 1 feb 2022 om 5:05 
More Tesla conecpts finally finding their way to the world, have been waiting for this one for many year (in reality) I will be happy to try it out once it's bugs are sorted out. Cheers.
[RTB] Sarianos 14 jan 2022 om 1:47 
@Cython I've really got to ditto DEADPOOP's suggestion of a user friendly interface pass, the current situation is more than a little cumbersome to deal with.
SIDEKICK 7 nov 2021 om 17:37 
theres gotta be a way to make this user friendly.
too many tinkering and remembering of the codes () etc.
why not let it be plug and play ?
Starscrem 17 okt 2021 om 11:16 
Worse than useless. Can't send power via optical transmitters on large blocks
FallenSunGaming 17 sep 2021 om 17:57 
yes
Xendaka Korva 17 sep 2021 om 11:11 
does the mod still work? Just curious is all
FallenSunGaming 13 sep 2021 om 16:29 
:)
InsKill 12 sep 2021 om 21:42 
@ FallenSunGaming - It's works!
FallenSunGaming 11 sep 2021 om 8:36 
delete mod folder, unsubscribe, resubscribe, and that should fix it InsKill Works for me with 240+ mods
InsKill 11 sep 2021 om 7:46 
Seem to be broked
Soul_XP 29 aug 2021 om 7:26 
whenever you feel like it, maybe add some updated screenshots?
Caramel 28 aug 2021 om 16:05 
Wooooooooooooooooooooooooooooooooooooooooooooooooooot
FallenSunGaming 28 aug 2021 om 8:31 
<3 Thank you Cython,
You
Are
That
Hero!
Cython  [auteur] 28 aug 2021 om 1:28 
Update:
- Fixed power issues caused by new update
Caramel 15 aug 2021 om 14:27 
owo the author responded? There's hope for an update yet!
FallenSunGaming 15 aug 2021 om 12:46 
haha, NP Cython, take your time, life comes first! :)
Cython  [auteur] 15 aug 2021 om 11:41 
Have some patience please.
Caramel 14 aug 2021 om 21:06 
the power converter keeps turning itself off instantly. This is annoying as there is no other mod that does this and I don't want to run a long scaffold line so, someone pls update this
Caramel 14 aug 2021 om 20:40 
plsssssssssssss someone update this so it works again
Asriel García 14 aug 2021 om 4:18 
Industry update broke the mod, reeeee
FallenSunGaming 30 jul 2021 om 20:11 
I'm thinking industry update broke it D: