It should work.
There is some delay to landing gear controller as well to ignore pilot error so after you flipped the switch to ON (point downward) the three green lights should start blinking and become steady on when the gears are down and locked/ready.

My landing gear controller has basic protection against rapid flipping of the switch and has stateful door control and gear control.

So you just have to turn the switch down and it works?

@mrfreasyt The landing gears were not made automatic.

However, both landing gears switches spawn as "UP" (off/red) so you should flip the one at the seat as soon as you get in to "DOWN" (on/green) even I believe my safety feature should not gear up until you got airborne.

How the heck dose the landing gear? Maybe add a manual mode (for those who can't understand the automatic aka me)

ok thanks but its sad there isent a way to disable it would be more acrueat with bomb and torps

You need to hold heading too when using altitude hold.

how to hold alt with out heding hold

Is it possible You can make a premade, Pylon, So its just a attach, With the button?

Who asked for you skill in the game?

I am horrible at this game, and this may be why, but the nose gun flap doesn't touch the ground, therefore the gun keeps flying the plane into the air, I don't know how to fix this please help.

ok, thanks!

>is there anyway to set it up so I don't have to keep pressing W?

After spawned, touch and hold to throttle display to enter config mode.
Choose desired control mode.
Choose "Relative" throttle mode (default is Absolute mode for joystick hardware throttle control).
Confirm finish to save.

is there anyway to set it up so I don't have to keep pressing W?

nvm

I can't figure out how to take off

What is the boolean
Cause I can't drop any bombs

how you go up?

when i try to drop the bomb, the electrical connector doesn't detach!!!!!!

Set it 3-11 for PWS premade weapons
FIRE 3
DROP 11

what do i set the FCU to for the 25mm cannon if its in the nose slot

ok

If you drop like that, bomb type weapon might just drop without confirm if it activates internal fuse or not.
It is intended made to release electrical connector from weapon side.
By default, you should set DROP channel at weapon module to channel 11.

well for me I click release and the electrical connector is still attached I fixed it if you want I can send it to you just added electrical release to pylon drop 1 through 8 or 10 idk

Oops I forgot to write the pylon config :P
Please set the keypad on weapon module/unit before attaching to aircraft

Thank you for the fast response. I can't seem to get the bombs B500 to release in flight. The rails release but the electrical connector does not. the nose gun also does not fire when I press 3, the hotkey button. Love the plane otherwise.

Switch panel for
Beacon light, Nav lights, Taxi lights, Landing lights, Strobe lights, Heaters, Infrared camera, fire Extinguisher and Parking brakes
^capital letters

What is the grid of letters for to the left of the pilot's seat?

nice!