Store Page
Cities: Skylines
All Discussions Screenshots Artwork Broadcasts Videos Workshop News Guides Reviews

Cities: Skylines

Store Page
Cities: Skylines>  Workshop > Collections > napiercpt's Workshop
Description Discussions0 Comments0
30 ratings
Best Of Asset Addiction: Interchanges
   
Award
Favorite
Favorited
Unfavorite
Description
Hi Everyone!

This is a collection that has been a long time in its coming. These are what I use depending on the solution I am searching for. My idea about interchanges is very simple: once you have found one that works for you, keep it, do not lose it (yeah, I have lost a few and can't find them again), after that there is no need to chop and change, unless you are looking to increase the size you are using to increase through-put. These are all really good-looking and well made. I hope you can find something here to increase your own collections, bring variety, and more fun to you as you play CS. With over 15 000 intersections on the workshop it is really daunting to find what you need, so I hope this is a good collection to help you as a starting point on your journey into the plethora. If you find, use and like something, remember to rate it up as a Thank You to the asset maker, I am sure it means a lot to them.

Johnny Whatevah.
Items (98)
3 way interchange #2
Created by 3nƒ0я¢3я
3 way interchange #2 (three level) Cost: 58,310 Upkeep: 615 / week...
4 way interchange #4 large version (45 deg. cloverleaf)
Created by 3nƒ0я¢3я
4 way interchange #4 large version (45 deg. cloverleaf) Cost: 127,100 Upkeep: 1,418 / week small version...
4 way interchange #4 small version (45 deg. cloverleaf)
Created by 3nƒ0я¢3я
4 way interchange #4 small version (45 deg. cloverleaf) Cost: 73,290 Upkeep: 832 / week large version...
stackinterchange forunevenground
Created by Atomgott
I got tired of not having a high capacity highway interchange that can be placed on moderately uneven ground. This simple elevated stack interchange has extra long slopes and can tolerate some terrain....
Roundabout Interchange
Created by Auriga
very compact freeway roundabout interchange by Auriga...
German Autobahn Intersection
Created by Crys
German cloverleaf-style autobahn intersection...
FKND Semicompact for Service
Created by FeanorKND
Not as small as I wished, but more compacted than the rest... pretend to avoid weaving, so it may do well with great traffic... please, feedback about this. Thanks! Used: - Fine road heights (to ramps at 9m)...
#Feed Clover Intersection
Created by Sileighty-Nine
#Feed Clover Intersection by Feed - Team Sokudo...
8x8 roundabout
Created by Gojulas2k
8x8 roundabout by Fists_of_fury...
double roundabout junction
Created by Gojulas2k
Hi guys. this is my double roundabout highway junction. Hope you enjoy it. i would recommend getting the no pillars mod to be able to get rid of those pesky pillars sitting on the road either side of the bridge. Enjoy. Check out my collection for more grea...
Highway cross-over round about
Created by Hartje
Hello fellow city skyliners! I like to create compact highway intersections that support traffic flow best. If you like this I would highly appreciate your rating. I've noticed this intersection has been one of my most efficient ones that supported a high ...
(Brocken)
Created by HorizonBC
Highway Exit by HorizonBC...
Best flow EXIT
Created by BilloNoSkillo
most effective highway exit...
Cloverleaf
Created by Koesj
Overview A 'standard' cloverleaf with collector-/distributor lanes. No landscaping though, the screenshots show how it looks when placed on a nice map. Size: 154x154 cells laterally, 64 cells across the diagonal Base cost: 102200 (oops!) Upkeep: 1212 p/w M...
Trumpet
Created by Koesj
Overview A relatively compact three-way trumpet interchange with a tight three quarter loop. I've done no landscaping in this interchange myself, the screenshots just show how it looks when placed on a nice map. Size: 136x84 cells - so tiny! Base cost: 359...
Gothic
Created by Koesj
Overview A high-speed 'diverging' gothic interchange with overlapping roadways. Unique in having left-hand drive going on right in the middle of it all! Note that the second-to-last and last screenshots show my suggestion on how to use NoPillars' 'ground c...
Five-level Stack
Created by Koesj
Overview A Texas-style Five-level Stack with one-way, two lane frontage roads and some very mild landscaping. Size: 170x170 cells laterally, 43 cells across the diagonal Base cost: 188410 (yikes!) Upkeep: 2013 p/w Max height: 36 meters Right-hand drive Bui...
Cloverstack
Created by Koesj
Overview A high-speed cloverstack interchange, not taking those remaining left-hand loops into account of course! No landscaping in this interchange either, the screenshots show how it looks when placed on a nice map. Size: 236x234 cells laterally (includi...
Small Highway Exit
Created by Korashen
Small Highway Exit by Korashen...
Starter Exit (Upgrade | No TL)
Created by Korashen
Starter Exit (Upgrade | No TL) by Korashen...
Big Highway Exit
Created by Korashen
Big Highway Exit by Korashen...
Medium Highway Exit
Created by Korashen
Medium Highway Exit by Korashen...
45° Flat Interchange
Created by Kreisy
45° Flat Interchange by Kreisy...
Loader's Stack Interchange #6 [C/E]
Created by LoaderSaints
A stack interchange which allows you to connect a motorway with a motorway with C/E lanes....
Loader's Stack Interchange #7A [C/E]
Created by LoaderSaints
An angled stack interchange which allows you to connect a motorway with a motorway with C/E lanes....
4-Way Freeway Interchange
Created by Michael
4-Way Freeway Interchange By: http://www.free2play.wiki/ (German)...
Freeway to 6-Lane
Created by Michael
Freeway to 6-Lane By: http://www.free2play.wiki/ (German)...
Morrack's Highway underpass (long)
Created by Morrack
Hello guys :) JiveTurkey requested a longer version of the highway unerpass. So as promised here it is :) tho a bit late. I want it to be noted that I am up for doing whatevever requests about intersections for the middle of the city or outside. message me...
Morrack's Highway underpass
Created by Morrack
Hello again :) Since I absolutely love to make compact intersections that can be used in the middle of the city and to be effective while doing so. I just decided to make a classic highway underpass that can fit perfectly in the middle of the city. :3 I ho...
Highway - Sm. Interchange I
Created by MolleMadsen
UI info: The thumbnail is custom made using photoshop, as I don't think the automically generated thumbnail looks as good as the original thumbnails....
Highway - Sm. T-Interchange II
Created by MolleMadsen
UI info: The thumbnail is custom made using photoshop, as I don't think the automically generated thumbnail looks as good as the original thumbnails....
Arrowhead Junction
Created by Nilipi
This aesthetically pleasing interchange offers a solution to those times when you need to connect 3 highways at wonky angles....
Autobahnauffahrt
Created by Peterson
Eine simple Autobahnauffahrt by Spielerheim.de...
Six Lane Road to Highway
Created by Pperson25
Six Lane Road to Highway - right hand lanes...
Smooth Interchange
Created by Prester
Very Smooth Interchange by Prester. No Edges in the road...
Roundabout Intersection (Old Version)
Created by Prometheus
Roundabout Intersection by Prometheus Improved Roundabout Intersection https://steamproxy.net/sharedfiles/filedetails/?id=1544788573...
Double-Paperclip Interchange
Created by Scotland Tom
Here's what I like to call the 'Double-Paperclip' Interchange. Why? Well, isn't that what it looks like? This was used as the main starting connection in my Boulder Rapids map. This is a very large interchange that takes up almost as much room as it can in...
Arrowhead Junction By Nilipi
Created by Leo Mystic Magic
I did not create this asset. It was created by Nilipi All I did was create a custom Thumbnail and Tooltip Image for the in game toolbar. I did reach out to people to ask them to update but I just don't feel like waiting months for them to be updated or pos...
45degree H'way Intersection By <{AU}>Medgineer
Created by Leo Mystic Magic
I did not create this asset. It was created by <{AU}>Medgineer All I did was create a custom Thumbnail and Tooltip Image for the in game toolbar. I did reach out to people to ask them to update but I just don't feel like waiting months for them to be updat...
SPUI - No Traffic Lights - 50x50
Created by Orchid
This SPUI doesn't have traffic lights that would restrict its capacity. Every travel direction has one lane, and most of the time vehicles can smoothly filter onto the freeway. But be wary, freeway traffic coming down onto the local road might not spread o...
3-level Semi-directional T 40x62
Created by Orchid
Another prefab interchange created with Slope mod enabled and a modified Terraform Tool to create the semi-directional ramp going below the ground. This asset can be placed in the map editor, since no surface roads nor pedestrian paths are involved. All br...
Raised Highway Junction
Created by SneakyFox
A relatively compact junction for an elevated highway joining a ground-level avenue. Not especially efficient for transport flow but should be simple to fit into a city....
Modified T-Bone Interchange
Created by Soruvisu
Modified T-Bone Interchange by Soruvisu...
Cloverstack Interchange
Created by Soruvisu
Cloverstack by Soruvisu 104x104 in size...
Fusion Interchange
Created by Soruvisu
Yes, it's a cloverleaf. Yes, it's turbine. Yes it's stack. It's all messed up together. Combining the directional, semi-directional, and loop ramp, you got Fusion Interchange (my own naming, usually it's called hybrid, but I like fusion more). 92x92 in siz...
Modified Bosiljevo 2 Interchange
Created by Soruvisu
If you look at the 3-way interchange in steam workshop, you will realize that most of their measurement have little difference between the length and the width, so it has a square shape, but not on this interchange. Inspired by Bosiljevo II Interchange in ...
Modified Orehovica Interchange
Created by Soruvisu
Modified Orehovica Interchange by Soruvisu...
T-Bone Interchange
Created by Soruvisu
This time, a simple T-Bone Interchange, inspired by 3nƒ0я¢3я's T-Bone Interchange. I create my own version with smooth slope (so smooth you can place it with slope limiter mod on). Size is 64x40 ...
The Turtle - Highway Exit Traffic Management System
Created by T​​​P​​​B
The turtle is a traffic management solution for highway exits. It consists of an asset and an idea. The idea is to divide the traffic into three main flows through an advanced highway roundabout and traffic distribution system. Advanced to me, at least. Un...
Starter Compact Intersection
Created by KingGobbo
A compact starter 2-lane interchange that can be used at the start of a new city. Can be upgraded to highway and sliproad with no issues. I've used this in my last two cities and have had no traffic issues so far. Any feedback or recommendations, please le...
Timboh's B-Trumpet Interchange
Created by Timboh
Mirrored Version: http://steamproxy.net/sharedfiles/filedetails/?id=410030736 Let's take a break from all the 4-ways and move on to some 3-way interchanges, and is there any better way to start then with a trumpet interchange. In real life, this is by ...
Timboh's Turbine Interchange
Created by Timboh
Looking for a turbine with U-turns? Check out grimarchangel's version: http://steamproxy.net/sharedfiles/filedetails/?id=409870774 The first interchange in my collection, and my favorite! I mean, just look at it! The spiral ramp pattern is almost mesme...
Timboh's T-Bone Interchange
Created by Timboh
Placeholder Description...
Timboh's Semi-Directional B-Trumpet Interchange
Created by Timboh
Mirrored Version: http://steamproxy.net/sharedfiles/filedetails/?id=411396977 More trumpets, Timboh? Do we really need more of these things? I'd say we do indeed need more of them. See, the semi-directional variant of the trumpet actually adds quite al...
Timboh's Y-Stack Interchange
Created by Timboh
Let's make some more three-ways! This right here is a Y-Stack, or specifically, one of the many ways to make a Y-Stack. This specific design is roughly based on the "twins of Copenhagen" as I use to call them; two almost completely inseperable interchanges...
Timboh's Semi-Directional A-Trumpet Interchange
Created by Timboh
Mirrored Version: http://steamproxy.net/sharedfiles/filedetails/?id=411400601 More trumpets, Timboh? Do we really need more of these things? I'd say we do indeed need more of them. See, the semi-directional variant of the trumpet actually adds quite al...
Timboh's A-Trumpet Interchange
Created by Timboh
Mirrored Version: http://steamproxy.net/sharedfiles/filedetails/?id=411393372 Let's take a break from all the 4-ways and move on to some 3-way interchanges, and is there any better way to start then with a trumpet interchange. In real life, this is by ...
Timboh's Windmill Interchange
Created by Timboh
There's something about the shape of this interchange that makes me giggle. I don't know what it is, but it looks awesome anyway! Windmill Interchanges seem to be completely forgotten by the world; I've honestly never seen one that still exist. Wikipedia l...
Timboh's Clovermill Interchange
Created by Timboh
Clovermill? Cloverleafmill? Windleaf? Two-level Cloverleaf Windmill Hybrid... thingy... Meh, I'll go with Clovermill. It doesn't seem like this interchange has a specific name except being a cloverleaf/windmill hybrid, so I just made one up! These intercha...
Timboh's Diverging Diamond Interchange
Created by Timboh
Placeholder Description...
Diamond-type InterChange A
Created by Zuben
Diamond-type InterChange A by Zuben Road height: -3m ~ 6m Size: 64x64 cell Using Mod Fine Road Heights Stricter Slope Limits NoPillars v1.1 American Roads Road Color Changer...
Clover-type JunCtion
Created by Zuben
Clover-type JunCtion by Zuben Road height: 6m ~ Size: 64x64 cell Using Mod Fine Road Heights Stricter Slope Limits NoPillars v1.1 American Roads Road Color Changer...
Rotary-type InterChange A
Created by Zuben
Rotary-type InterChange A by Zuben Road height: -3m ~ 6m Size: 64x64 cell Using Mod Fine Road Heights Stricter Slope Limits NoPillars v1.1 American Roads Road Color Changer...
Turbine-type JunCtion
Created by Zuben
Turbine-type JunCtion by Zuben Road height: 6m ~ Size: 64x64 cell Using Mod Fine Road Heights Stricter Slope Limits NoPillars v1.1 American Roads Road Color Changer...
Trumpet-type JunCtion
Created by Zuben
Trumpet-type JunCtion by Zuben Road height: 6m ~ Size: 64x64 cell Using Mod Fine Road Heights Stricter Slope Limits NoPillars v1.1 American Roads Road Color Changer...
3 Way Trumpet Interchange (Original)
Created by agusingnavy
3 Way Trumpet Interchange (Original) by agusingnavy Re-uploaded by request :) - Size: 52x35 cells Mods used: - Fine Road Heights PS: All my work is also published in www.simtropolis.com. If you find this in another website, it's without my authorization. C...
Full Diamond Interchange (Compact)
Created by agusingnavy
Full Diamond Interchange by agusingnavy It's not pretty, it's not a stack, but it's compact. Does it works?. Should, but this is CS, where the peeps change lines like this. I keep the big one for me ;P - Size: 54x54 cells - UI Priority. -1221 Mods used: - ...
Industrial Interchange
Created by agusingnavy
Industrial Interchange by agusingnavy Freeway-Urban Interchange (service interchange) - Measures: 64x42 cells Mods used: - Advanced Road Anarchy - Fine Road Heights - NoPillars - Precision Engineering None are required to use this asset. Amazing mods to im...
DCMI (Compact)
Created by agusingnavy
DCMI (Compact) by agusingnavy I AM LEGEND "The asset editor is a flat surface". This means you need to flatten the ground before you place the asset. "@Theprinceofgaming1 29 May 2015 @ 7:03pm ... will u upload a compacted version?" So , here it is. Does it...
The Exchanger
Created by agusingnavy
The Exchanger by agusingnavy I AM LEGEND Size: 64x26 cells "The asset editor is a flat surface". This means you need to flatten the ground before you place the asset. - agusingnavy -...
The Exchanger II
Created by agusingnavy
The Exchanger II by agusingnavy Thanks Skye !!! (12:47 minutes) Freeway-Urban Interchange - Measures: 62x26 cells - Max height: 12 mts - Highway height: 9 mts (if you want to continue the highway with 9 mts height use Fine Road Heights or Enhanced Road Hei...
The Flow Interchange
Created by agusingnavy
The Flow Interchange by agusingnavy ...
4 Way Hybrid
Created by agusingnavy
4 Way Hybrid by agusingnavy The Greatest "The asset editor is a flat surface". This means you need to flatten the ground before you place the asset. *UI Priority: -1223 - agusingnavy -...
DogBone Interchange
Created by agusingnavy
DogBone Interchange by agusingnavy The Greatest Thanks to SamsamTS for the feature "intersections support" and the tunnel mode from his wonderful mod Fine Road Tool. When I built this asset the tunnel mode was not available, so in order to achieve the tunn...
Turbine Interchange
Created by agusingnavy
Turbine Interchange by agusingnavy - Size: 86x86 cells - UI Priority. -1252 Mods used: - Fine Road Tool (Beta) - NoPillars - Precision Engineering - Road Color Changer None are required to use this asset. PS: All my work is also published in www.simtropoli...
Network Y Interchange
Created by agusingnavy
Network Y Interchange by agusingnavy UI Priority: -1210 Mods used: - Advanced Road Anarchy - Fine Road Tool (Recommended) - Network Extensions 2 (Required) - NoPillars - Precision Engineering None are required to use this asset (Except NExt) Comments, like...
Partial Cloverleaf
Created by agusingnavy
Partial Cloverleaf (A4 type) by agusingnavy One of the most popular Freeway to Arterial Interchange designs in Canada and the United States, but not in this game. And with tunnels? That's just because I like it :). Thanks everbody. - Measures: 64x64 cells ...
3 Way Interchange - Heavy Traffic
Created by agusingnavy
3 Way Interchange - Heavy Traffic by agusingnavy For industrial areas. The peeps will never change lanes. Next will be a fancy one. - Measures: 96x55 cells - UI Priority. -1222 Mods used: - Fine Road Heights - NoPillars - Precision Engineering None are req...
Pinavia Interchange
Created by agusingnavy
Pinavia Interchange by agusingnavy In this one I didn't use Fine Road Heights (?) - 111x111 cells Mods used: - NoPillars - Precision Engineering None are required to use this asset. Amazing mods to improve graphic appearance: -Ambient Oclussion -Sun Shafts...
Autobahnkreiselabfahrt
Created by Bдdmiиfu
Autobahnkreiselabfahrt by badminfu...
Train Turn Table
Created by brendan.rnp
Because we can...
45 Degree Highway Entrance
Created by dew
45 Degree Highway Entrance by dew...
The Beast (for heavy traffic)
Created by frostedjune
Simple intersection design that utilizes a roundabout to efficiently filter heavy traffic....
Single Point Urban Interchange
Created by itsacoaster
SPUI by itsacoaster. A compact interchange for your city. This interchange is functional and works pretty well for many purposes, but it struggles with very high volumes and with heavy truck traffic....
PentaKnot 1.1
Created by mrtree
PentaKnot by mrtree Slightly cleaned up version, inbound lanes maintain 3-lane highway further and split to exit lanes more smoothly....
Texas U-Turn
Created by pleg
Texas U-Turn. These types of interchanges are known for being common in Texas. They do require frontage roads, but the areas on the frontage roads can be zoneable!...
Hybrid Intersection 1
Created by r3load3d
Created with the help of (Advanced) Road Anarchy. Just for fun, using this render as reference: http://www.virginiadot.org/VDOT/Projects/Route29Solutions/asset_upload_file941_75387.jpg Not testet yet, maybe not the most effective intersection in C:S ;) You...
Infinity Hwy Roundabout
Created by shakinhandz
Infinity Hwy Roundabout by shakinhandz...
Elevated Highway T Interchange
Created by sum1else
T-style highway interchange for an elevated highway. I tried to make this somewhat realistic as opposed to supercompact as well as being reasonably good looking....
Raised Fw Intersection
Created by xXHistoricalxDemoXx
Raised Fw Intersection by xXHistoricalxDemoXx...
Simple Highway to Six-lane
Created by xnux08
- Sound barrier - Trees and bush - Right-hand traffic If you need standard highway version of this, check this : http://steamproxy.net/sharedfiles/filedetails/?id=408829594...
Simple Highway to Six-lane (LC)
Created by xnux08
- Trees and bush - Right-hand traffic If you need sound barrier version of this, check this : http://steamproxy.net/sharedfiles/filedetails/?id=408216604...
Skye's 4 Way Stack Intersection
Created by xskyestormex
Skye's 4 Way Stack Intersection by xskyestormex...
Highway Terminus
Created by AutumnQueen🍂
Highway Terminus inspired by the end of the Korean War Veterans Memorial Parkway in Staten Island, New York Elevation is 0m to 9m....
The Humble T-Bone (Service Interchange)
Created by Impact
ATTENTION: Since the last patch, sometimes you can't plop the interchanges with the embankments / hills (like the pictures). If it does not plop it like in my pictures (it looks good with bridges as well), subscribe to Fine Road Tool in order to fix it. Th...
I-10 US 61 Interchange v1.1
Created by Soruvisu
The 1.1 version I made to save more space and make it so the interchange has no at-grade crossing (see the picture). it's size is also the same as the original, I only change the ramp. There is also a picture that show the difference...
In 1 collection by napiercpt
Best Of Asset Addiction
163 items