Install Steam
login
|
language
简体中文 (Simplified Chinese)
繁體中文 (Traditional Chinese)
日本語 (Japanese)
한국어 (Korean)
ไทย (Thai)
Български (Bulgarian)
Čeština (Czech)
Dansk (Danish)
Deutsch (German)
Español - España (Spanish - Spain)
Español - Latinoamérica (Spanish - Latin America)
Ελληνικά (Greek)
Français (French)
Italiano (Italian)
Bahasa Indonesia (Indonesian)
Magyar (Hungarian)
Nederlands (Dutch)
Norsk (Norwegian)
Polski (Polish)
Português (Portuguese - Portugal)
Português - Brasil (Portuguese - Brazil)
Română (Romanian)
Русский (Russian)
Suomi (Finnish)
Svenska (Swedish)
Türkçe (Turkish)
Tiếng Việt (Vietnamese)
Українська (Ukrainian)
Report a translation problem
2. You will have to replace manually the rails with vania, but you must use a special one so : open FIND IT and select roads >> train >> vania. You'll see 4 types of rails. One of these rails (the second one for me) create a link on every node between the left rail and the right rail, like this :
=><= here is the solution ! So use this one to replace all the 4 rails of the station. After this TAKE AGAIN THE NORMAL VANIA RAILS to make the connexions between stations.
3. You now can create the lanes and make connexions without any bug. Save your game, and you'll see all working well with vania rails BUT : you must subscribe to RAILWAY 2 or the station won't load.
Might be an actual mod incompatibility. Please check out LOM (Load Order Mod), there is a bunch of functionality that will help you figure out the issue.
The Loading screen mod is not necessary and there is an updated version of it.
Still everything should work fine, as I have tested the station on the most recent version of the game.
All my station still work and I am able to use them as they are supposed to be used.
@raizumichin savoy-plaza hotel
Makes it look like a METRO entry, also.
Really well made.
Thanks.
@embeddeddeer97 try using the left side since I think it's supposed to work like that. I have tested many times and it always worked. P.S. why would you use the right side instead? :)
How much did the commission cost? You may well have gotten a new customer just from this!
Filesize shown on Workshop is irrelevant, station tracks are not 500mb and not add extra load of 500mb into your PC. If that was the case none of the people would use Railway 2, or any other network pack.
Loading Screen Mod sorts it out, by only loading one network into the RAM and use that data for other networks.
As long as network is visually same (aka concrete set, wooden set etc.) extra RAM load is about 40mb for ENTIRE set (including regular networks, mainlines and station tracks).
The ACST data is too large, can u release a version that uses vanilla asset???