Subscribe to download
HMD V3

• Changed ID input format (SRD2)
  
• Added thick target markers
  
• Added diamond-shaped target markers
  
• Added square and diamond-shaped target markers
  
• Changed the display so that the target marker is also drawn in the center when only the horizon is displayed

• Seat-mounted HMD
  
• Three-dimensional
  
• No display errors
  
• Freely customizable
  
• Easy setup
  
• Laser rangefinder direction correction
  
• Waypoint display available (WPD1 input)
  
• Radar response display available (SRD2 input)
  
• Radar response symbol customization available
  
• Map V3, SR V3, FCS Type 6, VLS Mk. 10, SM Type 3 included

We've improved the HMD V2 so that you can change the type of radar response.
A total of six different symbols can be drawn: (square, square + diamond, or diamond) x (normal or thick).
This uses the SRD2 input terminal, and will display correctly if the input is in the correct format.



4: Regarding ID,
When no target is being output: ID = 0
Identification ID for each target (value displayed on the HMD): 1-9999
Bold symbol: ID = ID + 10^4
Diamond + square symbol: ID = ID + 10^5
Diamond only symbol: ID = ID + 10^6

Example: Display a bold diamond + square symbol for a target with identification ID = 3.
SRD2 ID = 3 + 10^4 + 10^5 = 0110003

The SRD2 input terminal supports SRD1 output.
The SRD1 input terminal does not support SRD2 output.

Main Speed: Select the speed displayed within the rectangular frame. If "Ground Speed" is selected, ground speed is displayed within the frame and atmospheric altitude is displayed below it.
Radar Delete Tick: The amount of time target information is retained since the last target output to the SRD2. SR V3 only outputs a target the moment it is detected, so it requires about 100 ticks, but FCS Type 6 outputs a predicted value almost every tick, so about 10 ticks is sufficient.