Stormworks: Build and Rescue

Stormworks: Build and Rescue

38 평점
[ISO] Ultra Compact Loader
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
파일 크기
게시일
업데이트일
273.122 KB
2024년 3월 10일 오후 9시 58분
2024년 3월 31일 오후 2시 48분
변경 사항 4개 ( 보기 )

다운로드 위해 구독하기
[ISO] Ultra Compact Loader

Stewart5K님의 1 모음집
Craigworks Logistics and Industry
아이템 14개
설명
Compatible with all standard (ISO) or MCS containers which have sliding connector tracks.
Empty weight: 2400 mass
Fuel: 180 liters diesel

Operation:
1. Ignition key ON.
2. Release Container toggled OFF.
3. Lift Connectors toggled ON (illuminated control panel).
4. Hold Deploy Lift to extend lift arm.
5. Drive with remote control to target container and attach bottom corner electric connectors.
6. Hold Retract Lift until arm drops underneath container.
7. Push container if necessary until locked in place.

8. Drive to target location.
9. Disable container connectors and slide container off of UCL.
댓글 7
Stewart5K  [작성자] 2024년 3월 31일 오후 2시 15분 
@Экспрессо Sure, as long as you credit the original creation. I'm curious to see what you modified on it.
Экспрессо 2024년 3월 31일 오후 12시 55분 
Hi, I improved your loader, can I upload my modification into the steamworkshop?
SS Edmund Fitzgerald 2024년 3월 16일 오후 6시 16분 
How did you come up with this?
brufo 🦃 2024년 3월 15일 오후 9시 01분 
11/10 add some mags and u can use this as an aircraft tug too (allegedly), not many of those on the workshop these days
tums 2024년 3월 11일 오후 8시 28분 
10/10 paid review
AsMATTic 2024년 3월 11일 오후 1시 51분 
Throttle and steering could use some fine tuning. Extremely convenient. 9/10
Tigrrer 2024년 3월 11일 오후 1시 01분 
9/10 - very cool load system, it was a bit hard to understand how it works from the start, but after i had easily loaded the container, also i liked the tank steering

it has 2 small problems
1) suspension wheels, you can load much more weight on it if you make it stronger or replace it with normal wheels
2) unloading is hard, I failed to do it the first two times, 2nd time the container got stuck after the lift arm got under it (I tried to push it forward after the rail slider ended)