Subscribe to download
UCL Railborne Transport Harness

This train car functions as a support module for the CLI Ultra Compact Loader. It features not only the ability to carry along the UCL as part of the train, but also allows refueling, recharging, and maintenance of the UCL. It is operable using either distributed power from the train's top set of electrical connectors (motor channel), or by using the UCL's own power from a cable connection.

-] Direct Electric control to ensure no power draw when not in use.

-] Built in 1200 liter storage tank for carrying reserve fuel.

-] Storage for 2 replacement remote control units.

Operation:
1. Ensure Parking Brake is engaged using flip switch on side of car.
2. Ensure Slider Tension breaker on side of car is not engaged.
3. Ensure UCL's arm is retracted and Container Release button is toggled off.
4. Position UCL under harness gantry and allow non-sliding connector arm to attach.
5. Manually pull sliding connector arm towards UCL until all connectors are attached.
6. Engage Slider Tension breaker on side of car and connect auxiliary power cable if necessary.
7. Disengage Slider Tension breaker and Parking Brake flip switch.
8. When ready to release UCL from transport harness, toggle Release Container button.