Subscribe to download
Manipulator Controller 1.1

Warning! you have to build block in the same orientation like on picture.
Orientation of BLOCK Important.
Also put the blocks names into script head.


Arguments/Command:

LastAngle - command to set last angle,what you want.
"LastAngle 0"
"LastAngle 90"
"LastAngle 180"

commands: welder/drill/grinder - on/off welders on the last rotor.
"Welder"
"Drill"
"Drill_On"
"Grinder"

command TurnOn/TurnOff/Connect of welder/drill/grinder/landing gear/merge block/connector
"Tool"
"Tool_On"
"Tool_Off"

"ms.orientation" - change mouse orientation (Azimuth+Length) or (Up+Length)

indicator - set indicator coefitient (0.0 ... 1.0) slow or fast move
"Indicator 1"
"Indicator 0.001"
"Indicator 0.1, 1" - change 0.1 or 1.0

"Park" - command to park manipulator

"Back" - back to start position (but no park)

"AutoUp" - slowly up and trurn on welders.

"GPS:pos:2334:23323:233:#FFFF00FF" - take position at the gps.

"@Connector1" - find block with name "Connector1" , go to there and run AutoUp command.
it may any block name, trigger of command symbol @
"@Connector 1"
"@MyPrinterBlock 1"
"@MyPrinterBlock 2"