Stormworks: Build and Rescue

Stormworks: Build and Rescue

Not enough ratings
attack sub
   
Award
Favorite
Favorited
Unfavorite
Tags: v1.9.25
File Size
Posted
346.799 KB
20 Jan @ 11:35am
1 Change Note ( view )
You need DLC to use this item.

Subscribe to download
attack sub

Description
A mini sub that can run on 1 person but preferably for full functionality two people

Operation Manuel

~Start up
If you want to start the engine you need to do 3 things
1-connect main air (put throttle to full)
2-click starter
3-put number throttle to 1
After you do that the engine should start
~Driving on the surface
1st way
Put both generator and clutch throttles to 1
Get into driver seat
Drive
2nd way
Put motor throttle to 1 and clutch
~Diving
To dive you do not need to flood ballasts but to stay neutrally buoyant
To keep the engine running you can do 2 things
1-put the air intake to the gas tanks which you do need to refill manually
2-put up the snorkel using the periscope seat in the front and use main air
~refilling air
1-put the pump air allowance to full and click the button
2- if water gets into the tanks the engine can clog so click the pump button on the pump water button
~firing torpedos
1-click open torpedo door button
2-wait for water to hit 1.8k
3-fire when sub is not moving fast and is flat
Outcome - it does not blow up the sub
~reloading
1-click disconnect torpedo 1 then push the slider button next to where you fire , then make sure torpedo fire is off then you open the torpedo door lock it in then your good.
2-below the driver seat on the right there’s a slider , move that slider right and disconnect torpedo 2 , then slide it back to the torpedo 1 slot and turn off disconnect torpedo 1 , then follow the torpedo 1 instructions

That’s it for the instructions , the torpedos are not made by me , and I could not find the link to it , please comment it
Thank you

The torpedo can destroy most heavy cruisers with its sonar guided torpedos