Subscribe to download
Frontier Oil | Inland Oil Rig | OUTDATED/BROKEN

1. TO LOAD A ROD, Take a rod out of the rod storage rack on the left side of the platform. Slide the rod out and over the outer railing and grab the end of the rod and place in the arm clamp.
2. Navigate to the panel next to the drilling darrick and turn on the "Arm Clamp" and "Drilling Darrick Clamp" keys. The rod may need to be moved around a bit but It will then lock into place
3. Navigate to the control room and turn the "Panel Power" key and press and hold the button labeled "Pump Jack Up" and turn on "Turntable Clamp".
4. Once the Pump Jack reached the top of the drilling darrick head back towards the rod loading station.
5. Move the rod backwards to the tip of the rod is aligned with the edge of the arm clamp.
6. Press "Tip Rod" and the rod will move horizontal towards the drilling darrick.
7. Push the rod down into the turntable until it locks.
8. Head back up towards the control room and turn on "Pump Jack Clamp" and move the pump jack down until it locks to the rod.
9. TO START DRILLING, Turn on "Slurry Pumps In" and "Slurry Pumps Out" and press "START DRILL".


1. After the rod is in the connecting area of the drilling darricks slider. (REVERT to steps 1-6 in part 1 of now to load another rod)
2. An indicator will turn on labeled as "Rods Aligned" will illuminate and the "Connect New Rod" button can be pressed to lock the new rod into place.


When the pump jack makes it to the drilling darricks clamp when drilling DON'T STOP the drill! For some reason if the pump jack stops the well still gets deeper! After the well has stopped increasing it's depth, you can disconnect the swivel clamp and and the turn table clamp and move the rod down far enough for a new rod to be connected. I'll of course tune this when I get the chance to.

-Changes to structure
-Moved controls by the drilling darricks panel
-Improved rod connection issues.


Sawyer News: https://steamproxy.net/profiles/76561198443297702
Fluorescent Light Fixtures: https://steamproxy.net/id/bassalicious
Thumbnail: https://steamproxy.net/profiles/76561198311631787

https://discord.gg/MSg25NqZZr

If there is any questions, comments, concerns, please post them in the comment section below.

Sketchest © | Frontier Oil Company ©