Subscribe to download
LRM - DRILLING RIG TUTORIAL *UPDATED*

Welcome to Lee Roy Manufacturing.

This drilling rig is designed as a trainer on how to set up your own drilling rig for locating crude oil deposits.

*spawn at the prefabricated oil deposit site, or use in conjunction with a pre placed well-head*

*physics detail may need to be set to high for pumpjack to function*

THIS IS NOT A COMPLETE SETUP. THIS TUTORIAL IS ONLY TO SHOW HOW TO JOIN PIPES, DRILL INTO THE WELL, AND BRING CRUDE OIL OUT OF GROUND INTO TANKS. MORE PARTS ARE NEEDED FOR A COMPLETE DRILLING OPERATION.

WELLHEAD WIRELESS CHANNEL : CH 710, CH 1 (DRILL DEPTH) & 2 (WELL DEPTH)

JOINER CONTROLS : ORANGE
SWIVEL CONTROLS: RED
TURNTABLE CONTROLS : GREEN
CRANE CONTROLS : GREY (ON CRANE FRAME)
SLURRY TANKS : BLUE



1. MOVE CRANE INTO POSITION OVER PIPE.
2. GRAB PIPE AND MOVE OVER TOP OF ROTARY TABLE
3. ENABLE CLAMP ON JOINER
4. RELEASE PIPE FROM CRANE INTO JOINER, MOVE CRANE OUT OF WAY
5. SLIDE PIPE UP, ENABLE SWIVEL CLAMP
6. DROP SWIVEL UNTIL ATTACHED, DISABLE JOINER CLAMP
7. DROP JOINER TO BOTTOM OF RAILS
8. ENABLE TURNTABLE, TURNTABLE CLAMP, AND SLURRY
9. ENABLE DRILL! (DROP SWIVEL UNTIL YOUHEAR IT CONNECT AND HEAR ROCKS GRINDING, THEN CONTINUE DROPPING TO DIG

TO ADD PIPE:

1. STOP TURNTABLE AND SLURRY
2. RAISE SWIVEL UNTIL FIRST ORANGE PIPE JOINT IS WITHIN ROLLERS ON JOINER.
3. ENABLE JOINER CLAMP. DISABLE SWIVEL CLAMP.
4. MOVE SWIVEL UP OUT OF WAY.
5. MOVE NEW PIPE INTO PLACE WITH CRANE, UNTIL ALIGNMENT LIGHT ACTIVATES
6. CONNECT PIPES
7. RELEASE CRANE, MOVE OUT OF WAY
8. DROP PIPE TO NEXT JOINT
9. REPEAT ATTACHMENT
10. DROP SWIVEL, ENABLE SWIVEL CLAMP, TURNTABLE, SLURRY, AND DRILL! TO RESUME DRILLING

TO LEAVE PIPE IN HOLE WHEN DESPAWNING RIG:

1. DRILL THE LAST SECTION OF PIPE AS DEEP AS THE SWIVEL WILL ALLOW (FOR EASE OF CONNECTING NEXT SECTION)
2. DISCONNECT ALL PIPE CLAMPS. DOUBLE CHECK IT. NOW CHECK IT AGAIN.
3. DESPAWN AND RESPAWN


THIS IS STILL A WORK IN PROGRESS. THE DESCRIPTION IS CRUDE AT BEST, SO SOME INFERRING MAY BE NEEDED FOR INSTRUCTIONS. PLEASE LET ME KNOW IF THIS HELPS!

CHANGES:
ADDED LIGHTING
ADDED CONTAINER GENERATOR AND BATT CIRCUIT
ADDED WIRELESS WELL HEAD DEPTHS
CHANGED FROM SINGLE PIPE RACK TO ROTARY TRIPLE RACK

CREDITS:

Uses "MARCOTICS" pump jack setup from their " HOW TO: OIL" GUIDE https://steamproxy.net/sharedfiles/filedetails/?id=2948195606