Subscribe to download
Tugboat Porpoise

The Porpoise (Fictional) was a steel-hulled tugboat built in the 1930's. This tug was designed for towing on the river Thames, hence the low air draft and a folding mast to allow passage under small bridges. Porpoise's owners sold her for scrap in 1978.

---

1. Go to the Engine Room, there is a breaker panel beside the ladder.
2. Switch on the Main, Equipment, and Engine Breaker.
3. Turn the starter keys for the Generator and the Main Engine.
4. It can now be controlled from the Wheelhouse. W/S for throttle, A/D for steering. Hotkey 1 for higher torque on the engine. It is automatic so there is no button for reverse.

I felt that a realistic max speed for this kind of boat might not be suitable for longer journeys so it is higher. The engine is already large for its size, and the engine still runs at 9.5 rps max.

---

- Capacity; 11 seats, 2 beds
- 1x firefighting hydrant on fore deck
- 2x Auto large pump, 1x manual bilge pump
- Hull bilge external pumpout
- Some handheld equipment and Arctic outfits
- Heating
- 1x Large winch, 2x medium winch for towing
- Mooring attachments
- Some accomodation for people (fore and aft cabin)
- Electrical connectors on bow and stern for emergency towing

---

ZE MEC from Uran_Wind
https://steamproxy.net/sharedfiles/filedetails/?id=2416132817

If you want to scuttle the tug for no reason, there is a turnkey in the Fore Cabin section, located in the coal bunker. This will disable the bilge pumps and open hatches in the hull to allow sinking.

If there is any issues let me know in the comments.

Please ask for permission before reupload