Subscribe to download
JM OMNI OH12J Light Utility Helicopter

This helicopter is equipped with FDAlpha targeting systems, while the containerised missile platform is equipped with AFCS block II targeting systems, so no you cannot. However, the Fairhaven-class Flight II ships include remote control recon drones that CAN be configured to control the missile containers

can you use the RC mode with the containerised missile platform?

Great handling. The yaw turning is quite slow though, but otherwise it's enjoyable to fly.

I havent had any problems with this helicopter, it might be your controls.
Check the original vehicle through the link in the description. You will find more detailed instructions there, if you need them.

why does the collective go from 0 to 100 immediatly instead of gradually? is it something with my controls?

Wow thanks a lot.
An incredible device, congratulations.

For remote targeting using the OMNI OH12J, you should be able to find a keypad with a frequency setting. Make sure you are aiming at your target using the camera operator seat, and the laser must be on. On the ship receiving the data you should find remote control radios, you can set one of them to receive on the same frequency as the helicopter.

Then, you just have to set the targeting system on your desired weapon(s) to the remote control setting (usually 2 or 3, depending on which ship, it should be the last option before it goes back to default). Press the "Arm" button. Now you should be able to fire by using the seat in the helicopter.

This system is being phased out for replacement with JDSE Advanced Fire Control System (AFCS) which is currently present in the latest ship, the Lt. Albey-Class destroyer. Hangar-equipped variant and compatible helicopters are planned.

If you mean how to use the FD_Alpha system on ships, refer to these instructions:

You have to use the target designators to find a target.
1. get in the gunner seat down in the CIC (The room below the bridge)
2. Aim at your target
3. For manual designation press 5 and select the L button on the coordinates screen (activates laser-guided mode)
4. find the AG45 gun in the center command console
5. use the "Switch targetting system" button to set it to 1 (1 for the gunner seat, 2 for remote control)
6. press the "Arm" button

An excelent integration. Thank you for your job.
Could you explain a little about how to operate "JDSE FireDirector Alpha Block III targetting system BASIC EDICTION"?

Ask OMNI hes the mastermind behind the helicopter controls, my job was weapon integration and redecoration, you can check the original helicopter link in the description