Subscribe to download
OMNI OA30 Oriole

Omni International Industries OA30 Oriole light bush plane.

"Where others fail, Omni excels."


The OA30 Oriole is designed as a easy to fly utility aircraft.


Features:

-111kts
-300km+ Range
-GPS map - OmniMap Lite - Ground track and distance to waypoint.
-Autopilot - Heading hold, waypoint hold, and heading hold with cruise and hover modes
-Lights - Nav, Landing, Strobe, Beacon, Interior
-Communication radio
- Artic ready


Operating instructions:
1. Center panel: Master On
2. Center panel: Engine On/Off
3. W/S for pitch, A/D for roll, Up/Down for throttle, Left/Right for yaw.
4. Lower Left Panel: Park brake off

---------



Autopilot functions with heading hold (HD) and waypoint hold (WP).
Yellow indicates selected but not active.
Red indicates not active.
Green indicates active.
Grey indicates N/A.

Heading hold (HD) will hold current heading and can be adjusted with the +/- touch controls
Waypoint hold (WP) is available after entering waypoint coordinates into the keypad. It will hold bearing to waypoint and will circle in the area of the waypoint on arrival

Both Heading hold (HD) and Waypoint hold (WP) will active Altitude hold (ALT) upon activation. Altitude hold (ALT) can be activated or deactivated independently. While Altitude hold (ALT) is active, set altitude can be changed via the +/- touch controls.

When the autopilot is not active it will display current heading and altitude.
Heading hold (HD) will display set heading while active
Waypoint hold (WP) will display bearing to waypoint while active.
Altitude hold (ALT) will display set altitude while active.

----------------------------------------------------



Join the OMNI Discord server!
https://discord.gg/8fgww37tgN

-----------------------------------------------------

* This is based on a mix of light tail dragger aircraft similar to Super Cubs etc.



**PenguinO's comm radio

**mitsubishimax9's PFD-300 Avionics Package

*** Do not re-upload

**** All OMNI vehicles are made and tested with HIGH physics settings. Use of any other physics settings is not recommended and will void warranty.