Subscribe to download
M50 Super Sherman 1/1 Scale IDF Defence Force [STW]

M50 Super Sherman 1/1 Scale IDF Defence Force [STW]

This vehicle is a 1/1 replica of the M50 Super Sherman and I have called it ‘Dreadnought’ the name that is written in Hebrew on the front of the left-hand side panel.

This tank was used extensively during the Yom Kippur War (1973), and it is a conversion of the M4A4 Sherman but with the French AMX-13 cannon grafted onto it (This made the turret very cramped). Along with this there is the introduction of HVSS that can be seen on this tank which is one of the key characteristics making it an M50 Super Sherman and not an M51

I have tried to make this tank as accurate as possible meaning that in certain areas it is not the most user friendly, this includes the fact that the driver and assistant driver view port require you to be a female character to look through.

Armament:
-75mm SA50 L/57 Cannon
2 Option Zoom Scope
8.7 Second Reload
14 Shells
-7.62mm Assistant Driver Machine Gun
9 Magazines (50 shots each)
-50.cal Roof Mounted Machine Gun
5 Magazines (50 shots each)

Mobility:
-24mph Forwards
-10mph Reverse
-Brake Steering
-Realistic Transmission with reverse gear
-Realistic engine properties and overheating mechanics
-8 Cylinders

Start Up Sequence:
1. Move into Driver’s Position
2. Turn Electricity On
3. Turn On Instrument Panel Light Switch
4. Reset all breakers using the top switches
5. Turn On Magneto’s
6. Turn On Starter Motor (Wait 5 seconds then turn off)
7. Increase the Throttle (Bear in mind that constant max throttle use will cause the engine to overheat)
The Engine is Now Running
How to get moving:
1. Increase the clutch value on the left panel to 0.35
2. Ensure Throttle is full by holding throttle increase for 5 seconds
3. Turn on booster Switch
4. Turn Off parking Brake on Right
5. Turn Off Booster switch
6. Increase Clutch up to maximum value (Careful to not stall engine)
You are now moving at the maximum speed (This maximum throttle is not sustainable for the wear on the engine and can cause overheating, there is an automatic stop if the engine overheats but you will need to wait for it to cool down)

When turning the Tank, it is recommended to lower the Clutch slightly to decrease wear on the engine and prevent stalling, although not necessary on shorter turns at maximum speed
Use of Turret and Gun
When using the turret and gun ensure that the drivers hatch and the assistant drivers hatch is closed, otherwise the gun with be prevented from the full 360 traverse.
To reload the loader must open the key labelled ‘Open Breach’ they can then insert the shell into breach and then close it.

Firing the Gun
The gun controls are very self-explanatory, with there being a 2 variable zoom scope and loaded indicator
Commanders Position
Reflecting the cramped space inside the real M50 Super Sherman the commander is lacking a seat, although this was only a feature in some M50’s however the Commander has access to his own hatch so he can catch some fresh desert air and view the surroundings using his binoculars, he also has access to a radio which is very easy to use.

Other
There is a light switch in the driver position which turns on two dome lights inside the tank and the headlights aswell as red rear lights.
To refuel the tank all you need to do is ensure the magneto switch is on and attach a hose to the attachment point on the rear engine deck of the tank
There is an engine access hatch at the rear of the tank, although reflect its real-life counter part it is small and gives little access for repairs

If you enjoy this vehicle, make sure to check out the STW discord server to see other really cool and realistic creations aswell as to take part in historical events,
Enjoy your Day
Ferocious Fries 😊