Subscribe to download
BLG-60 | Bridge-laying tank of the National Peoples Army | Read description!!

The BLG-60 (Brückenlegegerät-60 = Bridge-laying device-60) was developed 1967 in the German Democratic Republic and starded the service 1969. The bridge was designed that all tracked and wheeled comabt vehicles of the Warsaw-Pact could cross it. The base of the BLG-60 is the T-55.

If you are interested you can watch the teaching video about the BLG-60 of the National Peoples Army:
https://www.youtube.com/watch?v=HeZap2okEoI

• Realistic top sepped: ~50Km/H
  
• 1:1 scale
  
• Bridge size: 20m x 3.25m
  
• Realistic hydraulic system
  
• The bridge can be layed and picked up from both sides

Avoid to use lower physics qualitys than high and avoid to use infinite electric, it could cause small issues on the functions.

1: Seat onto the driver seat
2: Turn on the "Main Battery" breaker
3: Turn on the "Fuel Pump" button
4: Torn on "Ingnition" button

1: Move the vehicle to around 3.5m away from the gap where you want to lay the bridge
2: Seat onto the commander seat
3: Turn on "Engine to Hydraulic Pump" switch (!! Engine must be running !!)
4: Turn on "Lift bridge up" switch
5: Use up/down to extend/retract the bridge
6: Use w/s to lift/lower the bridge
7: If you layed the bridge, like you need it, press "Release bridge form arm" switch
8: Afer releasing the bridge, retrackt the seccond arm using w/s
9: Turn off "Lift up bridge" switch
10: Turn the "Engine to hydraulic pump" switch off again

Picking up the bridge is the same procedure, but reversed.


Tell me about any bugs/issues or questions in the comments!

Don't forget to like an favorite if you enjoyed, its really helpfull

Parts of the Tracks on my BLG-60 are inspired by this T-54:
https://steamproxy.net/sharedfiles/filedetails/?id=2554574894

Please don't reupload or upload any modified versions without my permission.