Stormworks: Build and Rescue

Stormworks: Build and Rescue

Not enough ratings
MV Garnet
   
Award
Favorite
Favorited
Unfavorite
File Size
Posted
Updated
1.902 MB
13 Jul, 2021 @ 6:35am
2 Aug, 2022 @ 3:56pm
3 Change Notes ( view )

Subscribe to download
MV Garnet

Description
This is the MV Garnet, a medium-sized harbor tug. Like a lot of my other builds, she is based on a real ship. Overall, I’m pretty happy with how she turned out. She’s got a good amount of power, decent range, plenty of equipment, and a ton of paint blocks/other useless details! Also, she’s self-righting, which is always nice to see, right?

History (Fictional)
The MV Garnet is a harbor tugboat that was built in 1954 for general harbor duties around the Sawyer Islands. As a brand-new diesel-powered ship, she was in stark contrast to her much older steam-powered predecessors, which had been in service since the late 1800s! For the next 10-20 years, the Garnet was used for general harbor duties, occasionally being used as an improvised cargo transport. However, as the shipping activity around the Sawyer Islands slowed during the 1970s and 1980s, the Garnet was used for other jobs. One of these tasks was disposing of expired chemical explosives which, unsurprisingly, was a fairly dangerous job. In March 1989, she suffered a serious accident during one of these disposal operations. During the dumping process, some of the explosive-filled boxes failed to completely sink and drifted back under the ship’s stern. When the engine was started up again, the propeller struck one of the boxes, causing a large explosion. The Garnet was badly damaged by the blast and had to be towed back to port. After examination, it was decided that the damage was too extensive to be economically repaired, so the tugboat was simply patched up and donated to a local museum. For now, the Garnet has been beached near the Sawyer Islands’ Southeast Fishing Village until the museum can find the space and resources needed to fully repair and display it.

Specifications
Length: 24.75 m (81 ft)
Beam (Width): 6.25 m (20.5 ft)
Draft (Depth): 2.50 m (8 ft)
Total Height: 12.50 m (41 ft)
Top Speed: ~29 kts (53.71 kph / 33.37 mph)
Range: ~100 km (62 mi) at full throttle, but can exceed 200 km (124 mi) if cruising at a lower speed

Fuel Capacity: 14,161 L (3,740.94 gal)
Powerplant: Inline 5 Cylinder Engine (Modular, 3x3)
Mass: 16,822.01
Cost: $190,803

Credits
“ZE Modular Engine Controller” by Uran_Wind
https://steamproxy.net/sharedfiles/filedetails/?id=2416132817

"[4x3] Fully configurable GPS Autopilot" by Tajin
https://steamproxy.net/sharedfiles/filedetails/?id=1584578096

-"VHF RADIO - COMPACT" by Sheepdog and WH1T3_No1SE
https://steamproxy.net/sharedfiles/filedetails/?id=2057639205

-"Radar" by jecki1379
https://steamproxy.net/sharedfiles/filedetails/?id=2176478892

-"Radio Beacon Location via Multilateration" by kyaace
https://steamproxy.net/sharedfiles/filedetails/?id=2371252165

-"NJ Weather System" by MrNJersey
https://steamproxy.net/sharedfiles/filedetails/?id=1989931376

If I’ve used your stuff and forgotten to credit you, please let me know!

This vessel’s design and history is based on the MV Garnock[www.scottishmaritimemuseum.org].
10 Comments
StartYaBastard! 4 Jun @ 10:46am 
Still the best Tug in Stormworks, without a doubt. Use it daily now on some servers.
Hanz Panzer 24 Jun, 2023 @ 12:21pm 
Can youre tugs tug the other creations or no?
grum 12 Oct, 2022 @ 10:37pm 
what is the dock at the 3rd to last picture
Tommy UK 19 Jul, 2021 @ 9:56pm 
Cheers dude. :)
Potater_King  [author] 19 Jul, 2021 @ 8:33pm 
@Tommy UK I'm assuming that you're referring to the yellow error symbols that appear in the workbench editor? If so, you don't need to worry about it. This will show up in almost any creation, but you don't need to be concerned, the boat will still work perfectly fine.

Some of the parts are purely decorative, so they aren't connected to a power source, which may explain the error tags. Hope this helps!
Tommy UK 18 Jul, 2021 @ 10:46am 
I loaded this up and got electrical issues error tags all over the boat. Not sure what i'm doing wrong :(
Potater_King  [author] 13 Jul, 2021 @ 5:22pm 
@Dann Thank you! I do have a bunch of plans for steamships, if I can ever get around to building any of them!
Gvyvs 13 Jul, 2021 @ 4:19pm 
Great job mate, would love to see another steamship.
Potater_King  [author] 13 Jul, 2021 @ 2:27pm 
Thanks, I really appreciate it!
Red Dragon 13 Jul, 2021 @ 1:15pm 
One more, an amazing creation! Nice job on all your stuff!