Subscribe to download
龙潭（湾鳄水族馆）Crocodile aquarium

这是一个极美的栖息地，我用了40个小时制作它，这是一个环形山谷内的深潭，里面可以养鳄鱼，水面下有观赏通道！（为了美观我用了过量的植被，如果你考虑动物福利你可以自行删减）
我为了保存这个栖息地的全部地形，在最外部使用了透明围栏，所以内部的围栏包括水下的玻璃和道路都无法保存，你需要自己添加这些！

你需要按以下步骤来做。
第一步：删除最外面的透明围栏，这是我为了保存全部地形而设置的，你可以将其全部删除。

第二步：添加水下玻璃，你可以用弯曲的玻璃围栏，添加一个半弧形，封住下面的隧道

第三步：沿着玻璃添加道路，水下部分我用的是宽度为5米的道路，水上部分用的是宽度为6米的道路

第四步：添加水体，水位不要太低，也不要完全没过玻璃，否则透过玻璃不显示水的厚度，建议水的透明度设定为1.3

第五步：完成水上部分的围栏，将外部围栏高度设定为最低不低于1.25米，用透明围栏将其连接至水下玻璃

如何使用蓝图，不会的看这个 ：https://www.bilibili.com/video/BV16w411o7Hd


This is a very beautiful habitat. I spent 40 hours making it. It's a deep pool in a circular Valley, where we can raise alligators, and there are viewing channels under the water（ I use too much vegetation for the sake of beauty. If you think about animal welfare, you can cut it yourself.)

In order to preserve all the terrain of this habitat, I used transparent fences on the outside, so the internal fences, including underwater glass and roads, can't be preserved. You need to add these yourself!

You need to follow these steps.

Step 1: delete the outermost transparent fence, which I set to save all the terrain. You can delete all of them.

Step 2: add underwater glass. You can use curved glass to add a half arc to seal the tunnel below

Step 3: add roads along the glass. I use a 5-meter-wide road for the underwater part and a 6-meter-wide road for the water part

Step 4: add water. The water level should not be too low, nor should it go completely through the glass. Otherwise, the thickness of water will not be displayed through the glass. It is suggested that the transparency of water be set to 1.3

Step 5: complete the fence of the above water part, set the height of the outer fence to no less than 1.25m, and connect it to the underwater glass with a transparent fence

How to use the blueprint? Look at this : https://www.bilibili.com/video/BV16w411o7Hd

video：https://www.bilibili.com/video/BV1u54y1G7cD