Subscribe to download
Multicat Prototype One

is the first Multicat in our fleet and hopefully with time we will improve on the design and give our customers the best Multicats on the market!!

With this prototype we want to show you it's capabilities and advantages but bear with us, this is just the begginning!

We hope that you will enjoy using and testing our product so if you find any bugs, or flaws in it's design feel free to notify us!


Walk in the helm and on your left side you can see the panel what contains all the navigation lights,
for start ill advise you to turn on the NAV Lights so other boats in the area are aware of your position!

After you turn on your Navigation lights you can find your way to the Captains seat at the center of the bridge, Flip the switches labeled as Engines and Systems to get your Multicat up and running!

Now, you can turn on bridge lights what are on a panel to your left and hold W to go forward!

Button 1 is Port side engines reverse and Button 2 is Starboard side engines reverse, so you can use them separately for greater manoeuvrability.

On the right side you have reverse indicators so as a flip switch that transfers throttle form the Throttle leaver to the engines and incase of an emergency you have a switch what activates bilge pumps.

Outside you have few small winches for towing boats or barges.

On the bow there is situated a small crane and its capable of lifting +1000 mass!!!

To use the crane, hop on the helm and press 4 to unlock its rotation and other is labeled on the helm itself.
NOTE: When you finish using the crane just press 4 again and give it a little wiggle from side to side until it locks it self so it doesn't rotate and damage the ship.

For refueling there are two hatches at port and starboard side of the ship, Whilst open they give access to both of the engines and fluid ports for refueling.

With this information you should be able to safely drive our MULTICAT prototype!

ENJOY,

FYAKA