Subscribe to download
Automatic, NO Gravity Drill 3

Do you want a flat surface, or just ore? Well you came to the right place.
This it the latest version of my automatic drilling but on a big scale.

How to use:
1.First get time. you will need about 10-15min to full operation - sorry

2. if you take the new one, get it into position and then seperate the red blocks at the big motor to allow the upper part to spin (you will have to acitvate all the drills manually)
3. the big ship rotor and the upper drills must be off. (cut power)
4. the two rotors should be set off (not in reverse)
5. "something" the drill and start digging (slowly)
6. when the wheels get a grip activate the rotors again
7. put the thrusters marked off off. (the ones on-off let on, as they are for calibration)

8. activate the bigship rotor
9. activate the drills on the upper part.
10. look from time to time that the upper drills dont get stuck. (activat the two of the off marked thrusters if it goes down to fast or shut the ones makrt on-off off)
11. your work is done as soon as there is a flat surface.

Enjoy and collect the ore from time to time.