Stormworks: Build and Rescue

Stormworks: Build and Rescue

Not enough ratings
SBS LYNX Mk.I All Terrain Vehicle
   
Award
Favorite
Favorited
Unfavorite
File Size
Posted
Updated
574.219 KB
3 Nov, 2020 @ 1:26pm
9 Nov, 2020 @ 9:22am
2 Change Notes ( view )

Subscribe to download
SBS LYNX Mk.I All Terrain Vehicle

In 1 collection by ElfBossHogg
Stormworks - SBS (SeaBoss Systems) - Vehicle Collection
57 items
Description
SeaBoss Systems (SBS) LYNX Mk.I All Terrain Vehicle

Sturdy 3 passenger All Terrain Vehicle geared for Climbing and Off-Roading. Extremely resistant to impacts and suspension perfect for jumping and rough terrain. The LYNX is capable of speeds up to 120 km/hr and climbing inclines nearing 300% (70'). The vehicle is geared for torque and is equipped with All Around tires. With High Speed tires the LYNX is capable of speeds approach 170 km/hr.

FEATURES:
- 384L Fuel Tank for extended range
- 6 Speed Automatic Gearbox
- 3 Seats (Driver and 2 Passengers)
- Integrated Single Channel Radio with 9 Channel Selections
- Emergency Beacon
- Heater set to maintain 20'C
- Headlights, Roof Lights, Rear-Lights, Reverse Camera
- Rescue Gear: Fire Extinguisher, Blowtorch, 2 Handheld Radios, Night Vision Binoculars, Binoculars, 2 Flashlights, 3 Med-kits, Flare Gun and Ammo, Flares, Compass, 2 Ropes, Electric Cable, Fuel Hose, Defibrillator Kit, Beacon Locator Kit
- Rear Towing Hitch (Electrical Connector)
- Front Winch

CONTROLS:
W/S = Forward / Reverse / Braking
A/D = Steering
Up/Down = Change Radio Channel
Button 1 = Parking Mode
Button 2 = Headlights
Button 3 = Roof Lights
Button 4 = Rear Lights
Button 5 = Heater
Button 6 = RADIO - Push to Talk

Left Lower Panel1 - Winch Controls - IN/OUT
Left Lower Panel2 - Disable Tow Connector, Silence Alerts, Interior Light Toggle, Emergency Beacon
Right Lower = Ignition Key

Start Up and driving...
1. Turn the Ignition Switch to start the engine
2. Press W to go forward, when moving forward pressing S will apply brakes. As soon as the vehicle is determine to be at zero speed if you continue to press S it will automatically go in to reverse (back lights will go white). At that point W will be brakes.
3. To come to a complete stop apply the brakes until the LYNX reaches a speed of less then 1 m/s. At that point the system will go in to a brake state if no input is detected through W/S and it will stay in place with the Rear Lights indicating Braking (lit Red)
4. PARKING MODE - When you press 1 the system will apply full brakes, come to a complete stop and disconnect the Engine from W/S. The Rear Lights, Front Indicator Lights and a Light on the Upper Left Panel will flash red.
1 Comments