Subscribe to download
E-1 "GERMES"

The design bureau ELTech presents to your attention the plane E-1 "Hermes". "Hermes" is intended for long-range reconnaissance of the terrain, as well as coordination of military operations of the allied forces.
Specifications:
Crew: 7 people (pilot, co-pilot, meteorological expert, flight engineer, radio operator, navigator, commander)
Length: 30.5 meters
Wingspan: 10.75 meters
Height: 2.75 meters
Engines: two turbojet AlexsChosen
Fuel capacity: 10.3 thousand liters
Flight characteristics:
Maximum speed: 1008 km / h
Cruising speed: 432 km / h
Range: 1700 km
USER MANUAL
For pilots:
1. Turn on the main power (Batteries stats and power switchers)
2. Turn on monitors (Monitors and camera)
3. Turn on the ignition, power, fuel pumps (Engine panel)
4. Perform a test of all systems (Pre-Fly check)
5. If the test readings are satisfactory, press the system test button again.
6. Turn on taxiing mode on the ground (Taxi mode panel)
7. Activate the turbine (Engine panel)
8. At the start: set the thrust on the lever to 20 (Engine throttle leveler)
9. Turn off taxi mode (Taxi mode)
10. Take off
Optimum revs for certain speeds and ranges:
1. Minimum: minimum allowable speed, maximum range.
Leveler value - 17, speed - 350 km / h, range - 1500 km
2. Cruising: low speed, high range.
Leveler value - 21, speed - 442 km / h, range - 1000 km
3. Second cruising: high speed, medium range.
Leveler value - 40, speed - 630 km / h, range - 700 km
4. Afterburner: maximum speed, minimum range.
Leveler value of 113, a speed of 1008 km / h and a range of 310 km.
Monitors:
Big: performs a test of all systems, shows the distance traveled, the remaining flight time and distance, the expense for the distance and time, the map, also controls the autopilot.
Top left: shows speed (left) and altitude (right). If the height exceeds 10 thousand meters, the inscription "> 10k" appears - to find out more precisely, click on the height scale.
Bottom left: shows (left to right): turbine speed (R), turbine temperature (T), remaining fuel (F), battery status (B). To find out each parameter more precisely, click on the corresponding column.

!!! ATTENTION !!!
When stabilization is off, you cannot set the thrust value to more than 40

For the commander:
1. Turn on the main power in the fuse box
2. Turn on the power of the workplace
3. Turn on the monitor
4. Select a map or camera
Use the arrows to control the camera.
"Toggle distance" - turns on the laser rangefinder and displays its readings on the monitor
"Toggle gunslide" - turns on the reticle on the monitor
BIG THANKS
Art. Horizon on lua: https://steamproxy.net/sharedfiles/filedetails/?id=1766907221
Radar (simple): https://steamproxy.net/sharedfiles/filedetails/?id=1706969003
Radar (more difficult): https://steamproxy.net/sharedfiles/filedetails/?id=2074406823
Map (pilot): https://steamproxy.net/sharedfiles/filedetails/?id=2081888912
Map (commander): https://steamproxy.net/sharedfiles/filedetails/?id=1799889445
Display with time and temperature (headquarters): https://steamproxy.net/sharedfiles/filedetails/?id=2067998970
Load screen: https://steamproxy.net/sharedfiles/filedetails/?id=2031751835
Art.Horizon (pilot): https://steamproxy.net/sharedfiles/filedetails/?id=1978617522