Steam Workshop::Flight Modules [no mods/with glitches]

1-Axis Angular Accelerometer [no mods/with glitches]

Created by Tomatsu

This device measures rotational movement for 2 directions. You can use this to cancel unwanted movement (overdamp after steering) which makes it also ideal to aid in gyroscopic balancing. I did not invent this myself but got inspired by Sperzieb00n's creat...

1X1 Stabilizers [no mod/with glitches]

Created by Tomatsu

These are my remade versions of Brent Batch's vanilla 1x2 stabilizer but with the collision of merely 1 block! For those who do not know what stabilizers do, welding one to a creation will make that creation tip over really slowly when it's supposed to fal...

2-Axis Angular Accelerometer [no mods/with glitches]

Created by Tomatsu

This device measures rotational movement for 4 directions. You can use this to cancel unwanted movement (overdamp after steering) which makes it also ideal to aid in gyroscopic balancing. I did not invent this myself but got inspired by Sperzieb00n's creat...

Compact Steering Stabilization

Created by Tomatsu

This module whenever given input will skew your creation to one of 4 directions. It's mainly used in flying vehicles for either stabilization/balance correction or to do rolls, loops and steering. I got inspired by Lord Pain's Steering Stabilization but ha...

Fast Steering Modules (3x1 Compact Suspension glitch)

Created by Tomatsu

Use one of these for compact effective steering in any vehicle. First detach, then weld to your creation horizontally, connect both bearings to your seat and enjoy your freedom! They steer faster than their bigger versions (4 or 5 long) thanks to their sho...

Gyroscope Output Intermitter [no mods/with glitches]

Created by Tomatsu

With this you can adjust the correction strength of your gyroscope from a central point without needing to carefully select and adjust the power of your thrusters. It's meant for big flying vehicles with rectangular placed thrusters in 4 corners. It sends ...

Heavy Duty WS Converter [no mods/with glitches]

Created by Tomatsu

This bulky looking WS keys converter is made for endurance and doesn't suffer from high speeds (kinetic energy) so the sensors will always work correctly. It also won't glitch out or get stuck when hitting a wall really hard. Instructions: Connect the seat...

Heavy Duty WSAD converter [no mods/with glitches]

Created by Tomatsu

This big looking WSAD keys converter is made for endurance and doesn't suffer from high speeds (kinetic energy) so the sensors will always work correctly. It also won't glitch out or get stuck when hitting a wall really hard. Instructions: Connect the seat...

Hover Controller [noMods] [v1.0] - Make your ship hover stably

Created by Tomatsu

The Hover Controller is a piece of hardware made specifically for flying vehicles. Installing this on any ship will give it the ability to maintain a still hovering position in the air. By attaching it to the bearings of vertical rotating thrusters the HC ...

Hover Controller 1.0 - Show model

Created by Tomatsu

This workshop item is meant to test the Hover Controller 1.0 on a already build craft like in the video. Download this and immediately take a ride. For more information on the Hover Controller, including how to install it own your own craft, go to the work...

Lost Series: 360 Autocorrect Gyro

Created by Tomatsu

Since I'm on a break for an undetermined period I've decided to upload all my latest unfinished projects instead of letting them go to waste. I don't care what you do with them. This Gyro is compact and made for free rotational movements. Can also recalibr...

Lost Series: 360 Gyro Gimbal Thruster

Created by Tomatsu

Since I'm on a break for an undetermined period I've decided to upload all my latest unfinished projects instead of letting them go to waste. I don't care what you do with them. This gyro has been my most advanced glitch weld project up to date. It's a Gim...

Lost Series: Gyro + Correction

Created by Tomatsu

Since I'm on a break for an undetermined period I've decided to upload all my latest unfinished projects instead of letting them go to waste. I don't care what you do with them. This Gyro isn't made for rotational movements but has a build-in correction sy...

Multi Accelerometer [no mod/with glitches]

Created by Tomatsu

Detects falling, lifting, angular X and angular Y movement. It's a combination of my recent vertical accelerometer and my 2-axis angular accelerometer. Use freely without mentioning my name. Have fun! Creator Tomatsu...

Multi long range sensor (5-232)

Created by Tomatsu

This is a no-mod 10-step multi-range sensor with a range from 5 to 232 blocks. It's mainly useful as a flight instrument to show altitude. The one visible sensor are actually 10 sensors glitch welded together connected to the logic gates. Their range has a...

Omnidirectional Steering Module [no mods/with glitches]

Created by Tomatsu

Installing this module can make any vehicle easily roll, pitch, or yaw at desired speeds (6 directions). It makes use of the suspension glitch so you don't need any thrusters or wheels for it. It can be used for fast-paced stunt maneuvers with airplanes as...

Stabilized Thruster Module [no mods/with glitches]

Created by Tomatsu

This is a set of thrusters that will always face downwards through the use of stabilizer glitches. I made this one myself because I couldn't find any other so easily. Use it, copy it, no need to credit me. Specifications: x4 thrusters + 4 connected logic g...

The Complete Suspension Glitch Set

Created by Tomatsu

Suspension glitches are used to steer vehicles into any direction without using wheels/thrusters while also adding stability. Subscribe to this set and use it as part of your daily "toolbox". You don't need to give me credit. To use them, detach one you li...

Vertical Accelerometer (aka falling/rising detector) [no mod/with glitches]

Created by Tomatsu

This device detects whether it's falling or going up. This is mainly useful for flying vehicles to automatically determine the needed upward thrust to cancel out unwanted vertical movements. How does this work? 14 metal blocks have been glitched welded on ...

Accelmetre-7

Created by LuttinBuck

A basic Accelerometer with 7 outputs. Made as small as possible whilst stil being able to have 7 outputs and the asthetic design was mad to match that of the Gyro-series creations. Add weight to the top metal part if smaller accelerations are measured. If ...

horizon gyro

Created by Sperzieb00n

measures the offset between the vehicle and the horizon in 2 axis and outputs it as PWM signals, sensor output is suited for direct control of for an example; thrusters. gimbal size - 7x11 green pipe - mounting points green sensors - outputs axis 1 red sen...

2 axis RCS: damping

Created by Sperzieb00n

Uses the spring glitch to generate RCS thruster signals for angular damping. yellow - thrusters configuration X black - thrusters configuration + green - axis 1 outputs red - axis 2 outputs...

G-sensor 2 axis

Created by Sperzieb00n

Responds to G-force and angular speed I/O: switch - G sensor off (default on) bright sensors - linear acceleration dark sensors - angular speed Configure G sensor: spring tension - response <--> accuracy piston speed - high damping <--> low damping bearing...

3-axis angular speedometer

Created by Sperzieb00n

Angular speedometer, outputs boolean positive and negative rotation per axis, replace the springs by more/longer ones to increase sensitivity (increasing mass of the striped blocks also helps) red - X green - Y blue - Z The bolts are detection surfaces, ma...

Tomatsu's WS Thruster Controls

Created by Tomatsu

This is my collection of WS converters which are mainly used to control thrusters with the W and S keyboard keys. Some may react faster than others but may not function properly in big laggy machines or at high speeds. They also vary in size quite a bit so...

Lost Series: Simple 360 Gyro

Created by Tomatsu

Since I'm on a break for an undetermined period I've decided to upload all my latest unfinished projects instead of letting them go to waste. I don't care what you do with them. This Gyro is compact and made for free rotational movements. Creator: Tomatsu...

Gyroscope

Created by †‡†•Exceptable•†‡†

...

gyroscope + autostabi

Created by PapaJoe82

This blueprint doesn't have a description...

Micro Flight Computer

Created by Al Magma

A small flightcomputer that can turn most builds into a near perfect flier......

Flight Computer v4.1

Created by Al Magma

This blueprint doesn't have a description...

Flight Computer v4

Created by Al Magma

This blueprint doesn't have a description...

Flight Computer 15

Created by Al Magma

This blueprint doesn't have a description...

Gyro/steering module [No Mods]

Created by David Baguetta

3×3×4 Gyro and steering module -------------- NO MODS -------------- Its the latest gyro ive created. Its already build in in several creations. with decent flying capabilities. I havnt seen a smaller module so far. Its created with a lot of blueprint edit...

Hover Damper+Spring

Created by Charly Peño

Connect upper 8 ANDS to ring oscillator Green is PWM output for spring engine Red is PWM output for upwards pointing damper engine Blue is PWM output for downwards pointing damper engine Have a look at my hovercrafts MK IV and MK V, they both make use of i...

Gyroscopic VTOL stunt flyer

Created by Tomatsu

This thing can do rolls and flips while still being able to flawlessly auto-balance within a 50-degree off-balance rotation. I've made this to show some of you how such a flyer can be made. Copy parts as you like. Permission is given :) Uses a 2-step gyros...

Auto-balance and roll-pitch-yaw control

Created by Tomatsu

Installing this module in any small to medium-sized creation will enable it to roll, pitch, and yaw on command, and will enable it to automatically stabilize mid-air (within a 50° off-balance position). What is it, and how does it work? It's basically a gy...

Gyroscope (2-step, 360° vertical mobility, 50° max sensitivity) [no mods, with glitches]

Created by Tomatsu

What is a gyroscope A gyroscope is an instrument that can measure in what direction it is rotated. This helps vehicles in finding the counter-rotation they need to rotate back to a perfectly upright position. Degree of rotation This gyroscope separates the...

Scrap Mechanic