Tilaa ladataksesi
Gantry Crane mk.II

Welcome to the D.I.C. Gantry Crane. Designed for use in heavy lifting, salvage and construction operations. The crane arm is piped using large conveyors and advanced rotors. This allows the attachment to be connected and used to refuel and resupply ships regardless of their connector orientation. With two large cargo containers, two hydrogen and one oxygen tanks on board you are sure to have everything you need without having to reconnect to the base. In addition the large landing gear and mass block counter weights make it simple and easy to move small, medium, and even some large ships using the torque adjustments. Removing either of the two stock attachments and adding either welders or grinders make this crane a salvage and construction beast. Given that the crane head is attached via conveyors you can either grind down and store materials on-board or my favorite technique cut large ships into pieces and drop them in a grinding pit using the landing gear. Equally as useful is setting up a large grid ship projection nearby and using a welder attachment to end the non stop trips to a cargo access point for materials. The attachment head is also done via advanced rotor so you can make and store multiple crane attachments if you so choose. Thanks for looking and I hope you enjoy it. Feedback and requests are always welcome.



Main Features (Large Grid):

2 - On-board Large Cargo Containers
2 - On-board Hydrogen Tanks
1 - On-board Oxygen Tank
2 - On-board Batteries
1 - On-board Hydrogen Engine

D.I.C. Large Grid Crane Arm with basic connections (connector and landing gear)
-Fully programmed control cockpit
-Drive Mode Timer Block
-Lift Mode Timer Block

Gantry Frame with additional cargo small reactor, and batteries for recharging.



Control Layout:

Page 1

1 - Detach from frame
2 - Manual parking break
3 - Drive mode timer block
4 - Gantry lights
5 - Forward Camera
6 - Crane/Mode timer block
7 - Gantry Main Rotor +
8 - Gantry Main Rotor -

Page 2

1 - Upper arm rotor +
2 - Upper arm rotor -
3 - Upper arm pistons +
4 - Upper arm pistons -
5 - Upper arm rotor Tq +
6 - Upper arm rotor Tq -
7 - Mass block 1 ON/OFF
8 - Mass block 2 ON/OFF

Page 3

1 - Lower arm rotor +
2 - Lower arm rotor -
3 - Lower arm pistons +
4 - Lower arm pistons -
5 - Lower arm rotor Tq +
6 - Lower arm rotor Tq -
7 - Mass block 1 ON/OFF
8 - Mass block 2 ON/OFF

Page 4

1 - Crane head rotor +
2 - Crane head rotor -
3 - Crane attachment rotor +
4 - Crane attachment rotor -
5 - Gear Camera
6 - Gear Light
7 - Gear Auto-Lock ON//OFF
8 - Gear Switch-Lock

Page 5

1 - Crane head rotor +
2 - Crane head rotor -
3 - Crane attachment rotor +
4 - Crane attachment rotor -
5 - Connector Camera
6 - Connector Light
7 - Connector Switch-Lock