Subscribe to download
Quadcopter Rover

As said in the ancient times, "If the mountain is too steep, fly over it."

5 = transform (tip: make sure the landing gear are extended before switching back to rover mode)

rover controls:
1 = toggle left rotor direction
2 = toggle right rotor direction
j/l = adjust rotor/wheel RPM limit (30 or less is good for climbing steep slopes, 60 is good for flat land)

copter controls:
i/k = adjust blade pitch (press F12 to view aerodynamic forces overlay and fine tune with i/k)
3 = control from central probe core (for landings, press 3, engage SAS, and set target orientation to radial out for automated level flight, then focus on i/k to adjust blade pitch and land)

If you like my designs consider subscribing to my channel to show your support!