商店頁面
Stormworks: Build and Rescue
全部 討論區 螢幕擷圖 藝術作品 實況直播 影片 工作坊 新聞 指南 評論

Stormworks: Build and Rescue

商店頁面
Stormworks: Build and Rescue >  工作坊 > Anwaan 的工作坊
評價次數不足
Automatic Clutch
介紹 討論區0 留言19 更新註記
   
獎勵
加入最愛
已加入最愛
移除最愛
Vehicles: Mechanical
Microcontrollers: Microcontroller
標籤： v0.9.31
檔案大小
發佈於
更新時間
27.728 KB
2019 年 3 月 11 日 下午 8:40
2020 年 1 月 25 日 上午 8:49
3 項更新註記 （檢視）
建立者
Anwaan
離線
查看所有 15 個收藏（有些可能設為隱藏）
3,919 不重複訪客人數
1,803 目前訂閱人數
15 目前最愛人數

訂閱以下載
Automatic Clutch

描述
This is a two-stage controller with reverse. Controller will detect either forward or reverse input (1 or -1) and adjust the gearboxes and clutch accordingly. Set your throttle to have a minimum of -1.

It has a built-in engine idler that sets the throttle of the engine to 7% (0.07) as long as it is receiving an "on" signal. As the throttle increases, it will disengage the clutch and shift through the gearboxes as needed. Turn off the ignition signal to turn off the engine.

If you change between forward and reverse too quickly, it will stall the engine. I haven't figured out how to solve that yet. All of the inputs and outputs are labelled for easy connecting.

I've updated this to include property sliders for setting the engine rps and throttle levels needed to shift. You may need to fine-tune the settings to your build.
19 則留言
< >
Ozruul 7 月 29 日 下午 6:01 
how do you find it in game?>??
Anwaan  [作者] 2023 年 10 月 20 日 下午 11:45 
It should. I rarely use a single engine except for in automobiles and helicopters. I haven't looked at this in over 3 years, so a lot of it may be outdated.
Neshoch 2023 年 2 月 16 日 上午 8:17 
does it work with 2 engines?
shadowmanss8 2022 年 12 月 27 日 下午 6:37 
Cool
robin remmers 2020 年 8 月 19 日 上午 9:49 
HOW DOE YOU FIND IT IN THE GAME
Jason 2020 年 1 月 25 日 下午 3:19 
Nice one, thanks for the update :)
Anwaan  [作者] 2020 年 1 月 25 日 上午 9:00 
The minimum throttle level to engage the clutch had been set too high trying to overcome the power curve. I dropped it down to .11 so it won't rev nearly as high any more. I've also added sliders to the properties to make it easier to make tweaks to what a vessel needs.
Jason 2020 年 1 月 25 日 上午 12:12 
Generally works okay. It revs really high with the clutch not engaged at low throttle, any idea why? I appreciate there's been some updates that have changed the behaviour of how everything works.
Sgt. Max Cockburn 2019 年 9 月 24 日 下午 1:09 
I see :)

This is my first build in a very long time, thought I might as well try an automatic version.
Anwaan  [作者] 2019 年 9 月 24 日 下午 12:27 
I need to redress this since the curves update. I've been struggling to figure out how to optimize gearboxes now. Definately need some documentation on them!