Subscribe to download
Fantom mk.1 Cargoplane

Say hello to Fantom! Small beautiful cargoplane with some cool features I didn't use before.

1) Cruise control

Holds the plane at current altitude (if keyboard value is 0) or keyboard altitude, also holds roll. Easy to use.

2) Engines

Automatical engine control starts the engine only after reaching 0.4 throttle for comfortable usage. Button Air/ground switches gearboxes. Aur mode moves you as fast as the plane can, ground mode is made to move on the ground with a slow speed.

3) Landing gear

This plane has unique landing gear control system which doesn't spend your battery charge and locks landing gear with connectors to prevent crashing. Enjoy :3

4) AUTOMATICAL LANDING!!! Yes, it is. How to use it? Easy!
1- Enter the plane and find lots of keyboards on the wall.
2- Set runway keyboard selects 1, 2 or 3 runway to set GPS etc. For default set to 1.
3- Active runway keyboard selects runway to land on. You have 3 slots for different runways (1,2,3). For default set to 1.
4- Runway altitude keyboard sets how the runway is hight about the sea level. Just land there manually and look on your altimeter. Creative island is 5, arctic airfield is 24. Donkk is 8.
5- A-point keyboard sets coordinates of landing point A. Just put a GPS point right in the middle of the runway. (On arctic airfield it is marked with plane icon).
6- B-point keyboard sets coordinates of landing point B. Just put a GPS point in the beginning of the runway (like where yellow arrows are located on creative island runway). This point sets side where your plane will land from.

HOW TO START AUTOLAND:

1) Select runway to set and active runway.
2) Select runway altitude.
3) Set A point.
4) Set B point.
5) Turn autoland on with button.
To make autoland work properly do 1-5 just as I said, 1,2,3,4,5. NOT 5,2,4,3,1!!! Some logic requires this setup.
If you want to set different runway to some slot, you need to complete 1-5 list and you'll be okay. Do not forget that autoland has 3 slots for runways, and if you set all 3 you can just switch between them with Active runway keyboard and go to your destination.
Plane automatically brakes and turns off the engines. After full stop wait 5 seconds for all systems to enter manual control mode. I hope you gonna like this please rate Fantom if you like it!