Subscribe to download
Large Turbine Generators (plug and play!)

This is one large generator comprising of two jet turbines and logic that will keep the turbines/combustion chambers operating within safe limits without compromising efficiency and performance.

To use this in your own creations:

# SETUP #
1. Open the Select tool
2. Load this creation as a sub-assembly
3. Paste this creation once you have positioned it where you want it to be
4. Merge this creation to your own creation
5. Link the electric connections of the LARGE GENERATORS to your main batteries.

# USING THE GENERATOR #
1. Hold your interact button on the "Start SBD Generator" key button.
2. Adjust the "SBD Throttle" to max throttle.
3. Confirm that the WHITE digital display for "SBD Charge" (above the green display) is showing an increase in number up to "1.0000".
4. Perform steps 1 to 3 for the other side of the generator.
5. To stop the generators, set the throttle to 0 and then interact with the "Start Generator" key button again.

# OTHER NOTES #
If you want to test the generator:
1. Hold the push button on one of the far sides of the generator and..
2. Confirm that the Charge digital display decreases rapidly
3. Interact with the "Jump Starter" circuit breaker to join an auxiliary battery to get the generator running.
4. Start the generator as normal by following the steps contained above in "# USING THE GENERATOR #".

Feel free to use in your own creations as you see fit, no credit required.

Please check out a smaller single generator version here made by Eryk500: https://steamproxy.net/sharedfiles/filedetails/?id=1563439481

Credit to Eryk500 for the function logic gate formula.