Subscribe to download
Burnt Pier Pile Pack

A pack of burnt pier pile props for decorating shorelines. When old wooden piers go through the process of demolition, they will often be burnt instead of directly cleared, which has the effect of weakening the structure. After burning, the only remaining structure will be the support piles.


Each pile has a fairly low tri count, however, the total tri count can quickly rise when combined in a group. As a result, some of the props have a high tri count with a high LOD tri count and may cause performance issues / lagging on slower machines. In addition to the tris, all of the contents share the same 1024x1024 diffuse, spec, and normal texture.

• BurntPiles1 [3416 Tris, 420 Tri LOD] - A dense cluster of piles (62 total)
  
• BurntPiles2 [168 Tris, 21 Tri LOD] - A sparse cluster of piles (3 total)
  
• BurntPiles3 [840 Tris, 105 Tri LOD] - A medium density cluster (15 total)
  
• BurntPiles4 [392 Tris, 49 Tri LOD] - A line of piles (7 total)

These assets can be placed in water if the prop anarchy mod is used. Alternatively, these props can be placed on land and moved into the water using the MoveIt tool. Since the assets were designed with the pivot point at the water level of the prop (where the algea texture line is), you may need the Prop Snapping mod, which gives you the ability to raise and low the prop (by default it will be far below the water level).