Subscribe to download
DIY Demon Drop

The next attraction from DIY Rides is an Intamin 1st Generation Freefall, perhaps best known by Cedar Point or now Dorney Park's Demon Drop! Unlike our DIY WindSeeker, the ride is contained in one blueprint, but assembly is more difficult due to the amount and variety of pieces to recolor. To assemble:

1. Plop down the dis-assembled ride. Split the ride and the ride vehicle into separate structures, as you'll be copying and relocating the car multiple times.

1.5. Set the grid size and height to 4m and 2m, respectively. While not necessary, it will make assembly easier in the end.

2. Recolor the four main groups as desired. The colors division (pink, yellow, green, and cyan) are suggested, but with some extra effort custom color schemes can be applied, such as this one: https://goo.gl/HoNTvs

2.5. Recolor the final group using the same colors from step 2 (pink as pink, yellow as yellow, etc.) (or don't; again, custom colors are allowed. I won't stop you :P ).

3. (Delete the signs on the ground. They'll just make life more difficult from here on out) Select each group, including the four poles, and layer them on top of each other so the poles align. Delete the poles, and the main structure is done.

4. Repeat steps 2-3 for the ride vehicle. Copy the ride vehicle across the ride however you see fit. I'd also suggest placing one horizontal on the pull out. To do that, select all pieces in the car except the roof tile, rotate them back 90*, then realign them with the roof tile, and place on the pull out.