訂閱以下載
AirNav Decoder v5.7

For use with monitor part.
Connect logic as written at logic node.
Automatic drop navigation data when signal losses

Wiring example:
https://steamproxy.net/sharedfiles/filedetails/?id=1786807579

Another example: (a bit more complex)
https://steamproxy.net/sharedfiles/filedetails/?id=2223114966


Composite outputs:
10N~16N - GPS Data for Magic Index Marker
21N - Marker Signal
24N - DME (m)
31N - LOC X (-1 ~ 1)
32N - GS Y (-1 ~ 1)
32B - Back Course

Suggested settings for secondary unit that chain the COM through primary unit
21N - Marker Signal (same as primary)
23N - DME
29N - LOC X (GS is next (30N))
31B - Back Course


Usage guide:
- touch "I" for ILS mode
- touch "V" for VOR mode
- touch "A" for ADF mode
- touch two points on non-button area will switch to DME mode
- touch and hold non-button area to view IDENT page (does not switch from current active mode) / release to close IDENT page

For VOR mode:
- touch left / right area of screen for OBS +/-
- touch top set course to heading
- touch bottom opposite course (also reverse flag)


Planned future update for V5.8
* will edit the wording (marker beacon was written as beacon marker)
* will fix video flickering during mode change
* default mode
* mode change buttons re-positioning


V5.7 changes
- added marker beacon simulation for ILS mode
- added beacon output to COM Out (secondary AirNav can use same beacon channel)
(Buzzer set: https://steamproxy.net/sharedfiles/filedetails/?id=2376323281)
- wording error that marker beacon was written as beacon marker (please don't mind) will be fixed in future version

V5.6 changes
- Wind direction 000 is now displayed as 360

V5.5 changes
- added IDENT mode to check STATION IDENT
- added capability to display weather data in the IDENT page

V5.4 changes
- added DME data output (m) for external DME Unit
- updated command bar outputs for ADF mode
(DME Unit: https://steamproxy.net/sharedfiles/filedetails/?id=1981152772)

V5 changes
- added GPS Data output for ILS mode (10N - 16N) *for Magic Index Marker use*

V4 changes
- VOR mode upgrades
- added properties for passing outputs

V3.1 ~ 3.3 changes
- revised some calculations
- fixed DME report wrong distance

V3 changes
- added VOR mode
- moved ADF mode touch zone (button)