@RyGuy try this if you need to https://steamproxy.net/sharedfiles/filedetails/?id=3421062490

Let me fix my copy and post it as it's working...

When I subbed to this version the sensors are not there and the hangar doors are not opening for me either.

try powering down the station few a few seconds and power it back up

All seems to work for me but I have a local copy of it.. Let me download this version and check it

This station is fantastic! I've added a few extra solar panels with sun trackers and 4 jump drives to get within the area I need to be in. I do have an issue with the airlock system on either ends not operating as they should. Everything between the timers, sensors, doors, and air vents look correct in action and setup but they aren't working when I approach the doors from inside or outside. The hangar bay airlock and auto doors work as intended. All other doors work as intended. Anyone else have this issue? Should I just erase all actions within timers and other blocks and add them again?

Mine if I take this over and update it while making some changes of my own to it?

where is the remote control located
i cant seem to find it and i dont want to tear the statio napart anymore then i have to

NVM im just dumb and forgot to check the Gyro its sorted now.

Ok i have this station, I acquired it with minimal Damage, Now how in the 9 flaming hells do i make it stop spinning?

Ok thank i ask you because your station was alway next to it whenever it spawn in my game so I had to ask...

There's an airleak in what I think is the lounge\crew quarters area

I didn't make the asteroid. It must have been connected by the mod devs. I'd suggest asking them about the asteroid. Thanks!

I’ve seen this station on the mod v7 npc faction... and it’s always there with a special asteroid called” Ring # ( not sure if it’s 1-2 or3) but the question was that asteroid your making?

If so do you have it on workshop??

Thanks you

When I try to build this in survival mode it shows an error saying multiple grids.. is there moving arts in this blueprint?

I just finished reproducing the station in survival - but the button controls on the command deck seem to have lost their settings, what were they supposed to be?

How would I build this on survival?

could you add thrusters from all sides ? i once bumped into it with my ship and just started to float away.

Amazing! Must add a Jump Drive

I figured it out by...Engineering! Thank you!

It's haunted ;) jk - I have no idea why it would drift; this is the first I've heard of that issue. Sorry!

love this series, great work

Glad to hear! :)

No worries! I somehow got thrusters to work so she is stable for now lol

Thanks; I'm glad you like it! When I have time I can take a look - not sure when exactly that'll be though sry

Would you be able to update it with thrusters at all? :3 This is like my favorite station ^-^

Sorry no idea - I've put thrusters on before and had no issue. Could be a game bug I suppose.

I"m trying to put thrusters on the station to prent it from crashing to a planet, but when i put thrusters on it they don't activate, do you happen to know why?

When I first made this I don't think stations could move even if you put thrusters on them, so yes there is no way to fly it around as is, but certainly adding thrusters somewhere would be easy if someone wanted to move it

so you didnt design it able to be relocated

It's a station ;)

ion or hydrogen

Have modules?

Did you ever fix the oxygen issues in the blueprint? In addition to the one I described, I also discovered a spot in the habitation area that in the blueprint seems to be open enough to allow air through, but because of the way the sloped blocks work, the farthest room and the area just outside of said room actually don't pressurize at all. They're sealed, but they're cut off.

I also managed to set up a better arrangement for a pair of two carefully adjusted gravity generators, one on each of the loading arms, that gives better coverage of the station, eliminating that zero-g area in one of the airlocks. I also set it up so that the reactor area is actually gravity-free, because I feel that with it being something you probably wouldn't want to access outside of maintenance reasons, it'd likely not need gravity. Plus it's just fun. :D

I apologize if you have addressed these issues, I'm currently trying to clean up my subscribed files list before I get back into playing the game.

I LOVE THESE MODS they are SOOOOOOOO good devs relly needs these in explortation

Thank you very much. Now that i have permission i can begin work on it.

You sure do Grenaderade, thanks for asking; please link me what you put up - i'd love to see it!
Happy engineering :)

GopeScope do I have permission to modify this blue print and reupload it under a different name. Credit given to you of course.

Anytime!

Thanks for the help, great creations by the way, hope to see more of VC

This should show up as a blueprint (as opposed to a world) in your F10 menu in a game (no mods req.) Let me know if you don't find it there and I'll try to help further. Np on the reply - thanks for checking VC out! :)

i start the game and go into the workshop under load game and it doesn't show, ill try the in game f10 thing. PS: thanks for replying ive been really worked up over this because Void corp looks Epic!

No mods for Void Corp. Do you mean that you don't see any Void Corp items showing up in your in game F10 menu?

sorry to put another comment up but does the void corp series require any mods and if so what ones?

none of the void corp items show up in the workshop section, am i doing somthing wrong ?
Please Help!

Welp, apparently I had that message ready to post but didn't actually post it...

Anyway, I was right. Because of your ice sorters, the oxygen generator and tanks were actually separated from the rest of the base. The sorters are one-way, I think, and they weren't letting air get from the generator to the rest of the base. After testing by running conveyor tubing from the generator to one of the floor connectors, I knocked out one of the sorters and replaced it with a connector, and it seems to have solved the issue.

Hey, love the station, looks great, LOVE the detailed groupings (usually something I end up doing myself) BUT...

I also seem to be having issues with oxygen. The generator IS making it, because the oxygen tanks are filling up (one was disabled in the blueprint for some reason, but it's on now), but the vents don't seem to be capable of pressurizing any of the rooms completely. It's as if there's only so much oxygen to go around (even in creative?) and it's not enough for the base.

I suspect I know what the issue is, and I'll let you know if I'm right.

aaaahhhh finally a walthrough!!! DEEPLY THANKS!!!!

I edit my thumbnails with PicMonkey: http://www.picmonkey.com/ (free to use). Once I’ve taken a screen shot and edited it with that program (that’s where I add text and overlays), I change the thumb for the blueprint by going into the blueprints folder for SE using the following path: Space Engineers>Blueprints>Local>*then whatever blueprint you want to add a new thumbnail to*. Once there either there will be no file called “thumb” or there will be; save the image you want as the new thumbnail in that folder as a png file called thumb. If there was a file already there, replace it, if not – no problem, just save! Hope that helped; thanks for checking out the station, and happy engineering!

Hello, nice model as usual... just a stupid question, how do you add text to the blueprint image of your models? I'm getting mad to do so...