@Jebbediah Kerman its broken for 11 months now with the space update

its not working ive done everthing turned off infinte
all that

Please fix the train with the new space update!

@Grogu - Make sure infinite electricity is off, otherwise it won't move.

its not working for me

Updated

-The train now spawns just east of Sawyer North Harbour.
-RN-300 reactor replaced with newer RN-500 reactor.
-Driver's seats replaced and hotkeys added. Use W/S to set speed, press hotkey 1 to switch tracks and press Spacebar to sound the horn.
-Minor tweaks and visual updates.

@kriffe2004 - It won't, not after the railways got updated. I still have to move it.

For now, you can just download the individual locomotives and carriages and put together your own train. The new railyards makes doing so much simpler.

The train does not spawn where it's supposed to

Updated

-Startup procedure simplified.
-Boat carriage and boat added.
-Vehicles updated.

horn gets stuck on as soon as pressed

lemme try that

Ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

@Dragon_man - You can set the throttle percentage on the primary locomotive only - on the keypad behind the seats - and then turn the consist motors on. Then you don't have to set it on the carriages.

You can still set it on the carriages but then you have to set it for each carriage and leave it off in the primary locomotive. This can be useful if you want to apply more throttle to a heavy carriage and less to a light one, for example.

and i didn't check if both locomotives were running so i could do that too

carts?

do i have to do it in multiple?

i did but only in one cart and set it to 150

@Dragon_man - That's really odd, if it does that, then it means it's not getting enough power. Maybe double-check that the throttle percentage that go to the carriages is 150 or lower. Or check that both locomotives is up and running.

@ToastMaker - Yes, I already have a few and planning more. Check the page of the locomotive linked above, it's page have links to all the individual carriages (and inverted version of the loco).

Are you planning on making different carriages?

and was like that for the entire time

it was 2500

What is the generator output? It should be at least 1500 before you set off. The throttle will cut out if it consumes more power than it generates.

it goes stops goes stops

Is it started but won't move? Or can't you get it started at all? Make sure invert forward/reverse is only switced on in the secondary locomotive (the one facing south, without the throttle percentage keypad and consist motors switch), and radios is on and tuned in correctly. You then drive the train from the command carriage.

My brain is to small to make this thing function