Σελίδα Καταστήματος
Stormworks: Build and Rescue
Όλα Συζητήσεις Στιγμιότυπα Εικόνες Μεταδόσεις Βίντεο Εργαστήρι Νέα Οδηγοί Κριτικές

Stormworks: Build and Rescue

Σελίδα Καταστήματος
Stormworks: Build and Rescue >  Εργαστήρι > Εργαστήρι του χρήστη PenguinO > [Lua]Heading Display (analog) v2.3
[Lua]Heading Display (analog) v2.3
Περιγραφή Συζητήσεις0 Σχόλια18 Ενημερώσεις
18 σχόλια
< >
Twitchy115 17 Ιαν 2023, 17:51 
I want to, it just does weird things when I connect it up.
PenguinO  [Δημιουργός] 17 Ιαν 2023, 17:23 
@Twitchy115
If you don't want to connect wind sensor+2 linear speed sensors(direction), you should use the other version which also has smaller footprint.
Twitchy115 17 Ιαν 2023, 1:05 
When I start moving the wind indicator just sticks to the right of the monitor and becomes huge. I have a screenshot that I don't know how to add
PenguinO  [Δημιουργός] 24 Δεκ 2020, 1:58 
Yes, that's the practical way people do (I believe) :)
192.168.0.138 24 Δεκ 2020, 1:39 
Hello, can i modify your indicator for using in my autopilot, which i will upload to workshop? (of course I'll mention you and leave a link)
BRuthless 24 Νοε 2020, 14:28 
I managed to get it to work correctly in a boat. For some reason I had to add +0.5 to the left tilt sensor. Placing the sensor differently doesn't seem to work. It's facing to the left like on your planes.
PenguinO  [Δημιουργός] 23 Νοε 2020, 22:17 
There is forward speed condition check for stop mode and airborne mode (airplane).
It was designed for use on airplane.
BRuthless 23 Νοε 2020, 18:10 
The wind inficator works as expected when standing still, but when I start moving the indicator flips to the other side. I tried inverting all the inputs, but that didn't fix it. Has some update broken it?
PenguinO  [Δημιουργός] 20 Αυγ 2020, 22:52 
Use property mode of vehicle editor
Nosey 20 Αυγ 2020, 11:07 
do i set the linear speed sensors to directional?
MonkeyKing73 30 Δεκ 2019, 3:20 
Haveing a hard time getting this one to display?
PenguinO  [Δημιουργός] 26 Σεπ 2019, 23:42 
Recommended position for wind sensor is center (of Left/Right) and close to CoM position.
ecwskier 26 Σεπ 2019, 15:48 
i have the wiring setup should the wind thingy be ontop of my plane
ecwskier 26 Σεπ 2019, 15:48 
hmms
ecwskier 26 Σεπ 2019, 15:39 
hmmmmssss
PenguinO  [Δημιουργός] 26 Σεπ 2019, 15:35 
There is limitation that wind indicator may give some error when aircraft is banking hard or is slipping sideway.
If there yellow triangle is always visible at same part of screen, check your wiring.
ecwskier 26 Σεπ 2019, 10:26 
whenever im flying the oarange is always just on the right even when i trun and its super thick why is this
One Blitz Pepe 14 Αυγ 2019, 9:26 
nice job