サブスクライブしてダウンロード
ActionScript (if then else)

* ActionScript
* ************
* Version 1.2, July 2017
* Author: Alexander Weber, Switzerland
*
* Description:
* Check if a block has a specific state (trigger). If yes, do something (event), [optional: else do something]
* It's possible to have multiple events for one trigger.
*
* Example:
* Door,2$Light1,1;Light2,1$Light1,0 => if the Door is open, activate Light 1 und Light 2, else Light 1 off
*
* Use
* you only have to run the script once. But be shure, to have the correct parameters. Test the correct parameters directly in the programm block. after that,
* use a timerblock with the tested parameters. u can use the Custom Data too (better way), each line is one command
*
* Trigger Event:
* 0 = off all elements
* 1 = on all elements
* 2 = open doors, Hangar doors, sliding doors
* 3 = closed doors, hangar doors, sliding doors
* 4 = connected connectors, landing gear
* 5 = not connected connectors, landing gear
* 6 = ready to connect connectors, landing gear
* 7 = Cockpit is used cockpit
* 8 = Cocpit is not used
*
* Set Event:
* 0 = off all elements
* 1 = on all elements
* 2 = open doors, Hangar doors, sliding doors
* 3 = closed doors, hangar doors, sliding doors
* 4 = connect connectors, landing gear
* 5 = disconnect connectors, landing gear
* 6 = play Sound SoundBlock