Infinifactory

Infinifactory

Ei tarpeeksi arvosteluja
Logic: 4b->4b LUT
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Tiedostokoko
Julkaistu
4.158 MB
28.7.2015 klo 13.48
1 muutos ( näytä )

Tilaa ladataksesi
Logic: 4b->4b LUT

Kuvaus
There is nothing to enjoy. This is challenge for implementing complex logic.

Puzzle requires implementation of LookUpTable with 4 bit input and 4 bit output.
Map already contains sequence generator (numbers from 0-15, then random numbers, total of 50 numbers), one LUT to encode inputs (huge black box), comparator (to check your solution gives valid results) and clock.

Your task is to create circuit, that converts back numbers, that enter huge black box: you take output from black box, and have to convert them to signals that originally entered black box (conduits that go to black box are covered with invisible blocks, so you cant tap them). Your circuit must be fast: must produce output within 2 cycles after change of black box outputs.

Black box conversion is described by: {3,8,15,1,10,6,5,11,14,13,4,2,7,0,9,12} [serpent SBox 0]
3 kommenttia
AJMansfield 29.7.2015 klo 16.58 
Solved it 406/242/335.
boskidialer  [tekijä] 29.7.2015 klo 13.23 
because first required value is 0, your device have 12 cycles to init. If in that time your device may give non zero output, you can cut conduits to make them connect after first test, but before second.
AJMansfield 29.7.2015 klo 13.07 
How many cycles do I have for device setup?