Tilaa ladataksesi
Remote Habitat Erni

Remote Habitat Erni is an intermediate-sized, all-environment habitat with advanced processing and production capabilities, and provides living space for 8 players. This blueprint boasts a revolving refinery-assembler module at the center!

Power is generated passively using 7 batteries and 8 solar panels. The habitat is accessible via an airlock at the top of the ground-access stairs and below the landing pad. This remote habitat is unarmed, but does include an auto-welder-repaired, heavily armored decoy tower to protect against lightning strikes. No mods are used.

Ore, ice, and part processing and production are provided by 4 advanced refineries that are upgraded with yield modules, 1 advanced assembler that is upgraded with speed modules, and 2 O2/H2 generators. Ore, ice, and parts are stored in 1 large cargo container and 2 small cargo containers; hydrogen gas is stored in 2 small hydrogen tanks, and oxygen gas is stored in 2 oxygen tanks.

  - Mass: 1,186 tons
  - Length: 100 meters
  - Width: 102½ meters
  - Height: 40 meters
  - Blocks: 2,188
  - PCUs: 7,804

This blueprint includes two sub-grids: 1) refinery-assembler module on an advanced rotor, and 2) antenna dish on a hinge.
(See the fourth-to-last picture for the projector configuration.)
1. Find a reasonably flat building location; the blueprint only has two ground anchor points, so placement should be easy.
2. Build a battery that is set about halfway into the ground.
3. Build a projector on top of the battery; the projector's front (vertical line) will be oriented toward the habitat's landing pad.
4. Load the blueprint into the projector; set the projector to "Keep Projection" to enable repairs.
5. Build the blueprint.
(See the third-to-last and second-to-last pictures for the projector configuration.)
https://steamproxy.net/sharedfiles/filedetails/?id=2984082333
1. Build a conveyor junction on top of the advanced rotor's head.
2. Build a projector in front of the conveyor junction; the projector's front (vertical line) should be oriented away from the conveyor junction.
3. Load the blueprint into the projector; set the projector to "Keep Projection" to enable repairs.
4. Build the blueprint.
(See the last picture.)
1. Locate the hinge on top of the refinery-assembler module.
2. Build an antenna dish, attaching it to the antenna hinge.
3. Tilt the hinge to 45° (or less).
4. Lock the hinge and zero-out the hinge velocity.
5. Locate the button panel in the south building; turn on the advanced rotor; a good speed is 1-3 RPM.

  - 34,206 Steel Plates
  - 1,232 Metal Grids
  - 5,550 Interior Plates
  - 9,533 Construction Components
  - 1,123 Motors
  - 313 Large Steel Tubes
  - 4,778 Small Steel Tubes
  - 999 Computers
  - 101 Displays
  - 7,118 Girders
  - 18,757 Bulletproof Glass
  - 560 Power Cells
  - 384 Solar Cells
  - 320 Superconductors
  - 31 Medical Components
  - 44 Radio-Communication Components

  - Decorative Blocks 1
  - Decorative Blocks 2
  - Frostbite
  - Sparks of the Future
  - Heavy Industry
  - Warfare 1
  - Automatons