Stormworks: Build and Rescue

Stormworks: Build and Rescue

Ei tarpeeksi arvosteluja
M3E1X Anti-Tank Recoilless Rifle
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Tiedostokoko
Julkaistu
14.094 KB
28.4.2023 klo 9.16
1 muutos ( näytä )
Tarvitset lisäosan käyttääksesi tätä esinettä.

Tilaa ladataksesi
M3E1X Anti-Tank Recoilless Rifle

2 kokoelmassa, tekijä Aome
- Aome's workshop -
30 luomusta
-Aome Heavy Industries- Infantry weapons
4 luomusta
Kuvaus
=Description=

The M3E1X is man-portable recoilless rifle. 

It is equipped with a basic ballistics computer, allowing for accurate strikes based on pre-measured distance to the target.


=How to use=

When moving, grab the invisible handles under the muzzle and on the breech at the same time and lift.



[Firing procedure]

1. Lift the main body, move it to a position suitable for shooting, and face the target.

2. Grasp the steering handle and hold the binoculars in your hand. 

3. Enter the distance to the target with the left and right keys. (Range from 0 to 500m) Looking at the front, you can see the current input value and safety device status with a tool tip.
4. Aim vertically. Be sure to look through your binoculars. 

5. After adjusting the elevation angle, fix it with a magall and adjust the sights in the horizontal direction.

6. Release the safety device and fire at any timing. 

7. It take a few seconds to reload before the next shot.



[Notes]
-The ballistic computer and sights are designed with the assumption that the player is a man with binoculars. This is because the height of the line of sight changes depending on the character's gender and what they are holding.

-Also, ballistic computers are not perfect and are only accurate against targets at the same altitude as you. Enemies below or above you, or shots from moving vehicles will not hit accurately.
-The status of magalls and safety will not be shown unless tooltips are enabled. Please enable it from the setting screen. 
-Fixed with magall makes vertical aiming less responsive. Align the elevation angle and then fix it. 

-This translation is from Japanese by Google Translate. Please let me know if there are any errors.

3 kommenttia
xva cl1pse 2.5.2023 klo 11.18 
Can you pls make video of use it?
Aome  [tekijä] 29.4.2023 klo 6.37 
I'm so happy that you remember me !
Peanut 29.4.2023 klo 1.47 
You are back!!! Awesome!