Abonner for at downloade
SA-H70A Alya - Heavy Transport/SAR helicopter

Scarborough Rescue Service Vehicle Collection

---

The latest addition to the SRS fleet, the SA-H70A Alya is an all-weather heavy lift helicopter, capable of transporting mission critical equipment and hosting airborne triage. The aircraft’s high performance and reliable nature enables it to battle even the worst of meteorological variables; designed for endurance, the Alya can fly for a continuous 1600 kilometers, allowing you to reach even the most isolated islands. The sophisticated cabin is also compatible with standardized pallets, the SRS stretcher and a variety of light vehicles.

1. - BAT 1/2 BUS - ON
   
2. - Avionics main - ON
   
3. - ADIRS - ON
   
4. - HYD A/B/C - ON
   
5. - Engine fuel valve 1/2 - OPEN
   
6. - Engine fuel pump 1/2 - ON
   
7. - Parking brake - set check
   
8. - Lights as required - NAV, beacon, strobes
   
9. - Rotor brake - OFF
   
10. - ENG 1/2 MASTER - ON
    
11. - GEN 1/2 - ON
    
12. - once engines are started (green light "starting" is off) - ENG 1/2 IDLE/FLIGHT - SET FLIGHT
    
13. - Parking brake - OFF

if ambient temperature <0°C turn on anti-ice

Don't change the target rotor rpm unless engine load exceeds 100%

Don't cruise with heavy loads on the winch

IF YOU WANT ALL FEATURES TO WORK PROPERLY YOU NEED THIS ADDON!

Altitude hold
Heading modes

• Heading hold
  
• ADF heading hold
  
• Waypoint heading hold

Cruise mode

To change modes simply press change heading mode. The autopilot will work once a mode is selected and the autopilot master is ON.
You can set the target altitude/heading on the keypads on the bottom dash.

To select ADF waypoint press the "T" button on the HSI screen and then select your desired waypoint.
To enter custom waypoints you can either use the map screen, pressing "A" will add a waypoint to your current position on the map, "L" will clear the last waypoint, "C" will clear all waypoints, or you can use the keypad in the middle to add a waypoint.

Radar suite
You can enable the lidar by pressing the ON in the left upper corner of the said screen. And range can be changed by pressing R right below it. (2nmi, 1.5nmi, 1nmi, 0.5nmi)

Search and track radar can be enabled by pressing TOG in the right bottom corner of the said screen and you can toggle between the modes by pressing MOD right under it.

Winch camera can be toggled by pressing W on the CAM screen.




Uran wind - ZE gyro (heavily modified)
Klara - render
Serpentine - SRS logo
special thanks to SRS public testers

---

[discord.gg]
Join SRS server today![discord.gg]