Abonnera för att ladda ner
2TE116 A

It is advisable to use the second section
https://steamproxy.net/sharedfiles/filedetails/?id=2943581772


First you need to turn on all the flip switches near the left exit and in the cab, then on the driver's panel turn on the "Fuel Pumps" flip switch and start the diesel with the button (hold for 3 seconds).

!!! Be sure to release the Handbrake (it is behind the seat of the assistant driver).

After the Engine has started, turn on the "Take Control" flip switch. Congratulations, you can go.

To connect the second section, you need to connect cables and hoses near the train coupler. After that, start the second section as well as the first, it is also necessary to release the handbrake.

!!!Important!!! The "Take controll" toggle switch should only be turned on in the cabin you are in, control will not be taken in another cabin until you release it in the first one!

The "Invent Reverser" toggle switch is needed so that if your cabin of the second section looks at the back of the first section, If you have the Second section set correctly, then turning on this toggle switch is not necessary!