Inscreva-se para baixar
SBS Fuel Car Mk.2

---

UPDATED: October 15th to support new train components

The Fuel car has two separted tanks that currently spawn at 100% with Diesel Fuel (Tank 1: 42,915L, Tank 2: 41,876L). If you want to adjust the Fluid Spawner they can be found on top and are the located in the centre of the hash marked squares.

There are 4 Fuel Flow controls on the car, 2 assigned to each (one on either side of the car). Each Tank Control station can choose to operate with the following consideration: Pump IN, Pump Out, Bypass Pumps. On Bypass the Fuel flow is determined by the external pumps feeding your system. On Pump IN/OUT the fuel flow is also determine by the direction defined to the internal pumps. NOTE: The pumps feed all ports on the Tank (Left Winch, Right Winch, Left "Old" Port, Right "Old" Port, Top Port, Top "Old" Port. There is also a set of controls at each station that allows you to transfer fuel back and forth between Tank 1 and Tank 2.

If you are running the PUMA MK2 HST you can activate the Power Assist Motors on the car to assist with speed control...

On each Fuel Car as you top the stairs there will be a orange control panel on the left side of the train. There are two buttons, a radial segment, a requested speed indicator and a number pad specifically assigned to this panel.
1. Ensure that the train number set by your number pad matches the train set number of the Master Engine (HST). By default the number will be 222 (if the number pad is left as 0). This number is reflected on the display panel on the outside of the train and the panel visible to the interior seating section. All of the SBS train elements in your "chain" should have the same number.
   
2. Click on ACTIVATE ASSIST MOTORS, this will light up the top part of the radial segment as green. This will activate electrical motors on the car which are powered internally by batteries but recharged by the hitch connection to the main train engines. If there is a Master Engine present the two centre radials will light white indicating a positive integration. The motors will automatically adjust in order to assist in bringing the entire train to the requested speed as defined by the Master Engine (HST)
   
3. If the train car is pointing opposite the direction of the currently defined Master Engine (HST) then click the REVERSE DIRECTION button, this will light up the bottom part of the radial segment as yellow. This is necessary to ensure that the wheel spin direction reflects the proper direction as defined by the Master.

NOTE: Each train engine should be able to provide enough electrical power generation to power 1.5 additional cars. Ideal setup is 1 car with ACTIVE ASSIST per engine in order to acquire max speed.



LINK for PUMA MK1 High Speed Train -> https://steamproxy.net/sharedfiles/filedetails/?id=2087793425

LINK for PUMA MK2 High Speed Train -> https://steamproxy.net/sharedfiles/filedetails/?id=2841449190