Stormworks: Build and Rescue

Stormworks: Build and Rescue

36 คะแนน
GS-42 "Sea Sovereign" Droptank
   
รางวัล
ชื่นชอบ
ชื่นชอบแล้ว
เลิกชื่นชอบ
แท็ก:  v1.5.6
ขนาดไฟล์
โพสต์
อัปเดต
252.715 KB
4 ส.ค. 2022 @ 12: 35pm
4 ส.ค. 2022 @ 12: 38pm
2 หมายเหตุการเปลี่ยนแปลง ( ดู )

สมัครสมาชิกเพื่อดาวน์โหลด
GS-42 "Sea Sovereign" Droptank

อยู่ใน 1 ชุดสะสม โดย WH1T3_No1SE
GS-42 "Sea Sovereign" and Addons
5 รายการ
คำอธิบาย
Pls don't drop it, it's fragile.
Description

A droptank attachment for GS-42 Sea Sovereign helicopter.

Use selection grid tool to paste it into the helicopter then it should display fuel level in droptank on centre 1x3 display.

How to use selection grid tool? Follow this steps!:
  1. In workbench upper right corner is selection tool, select it.
  2. On left Toolbar select "Load Content"
  3. Go to Workshop tab
  4. Select attachment
  5. On left Toolbar press "Paste"
  6. Done!
7 ความเห็น
ajmarston 25 ก.พ. @ 12: 13am 
how do you connect it to the choppa?
comments here pls
Flameblast 18 ส.ค. 2023 @ 10: 56am 
ohh ok, but how do I drop it after? does it just remain on? And sorry for a likely stupid question.
WH1T3_No1SE  [ผู้สร้าง] 18 ส.ค. 2023 @ 10: 00am 
"Addon Hardpoint Relay" is for connecting electrical power to the relay hardpoint, on droptank it turns on the fuel pump in droptank.
Flameblast 18 ส.ค. 2023 @ 9: 57am 
I connected the droptank and I know it is well connected cuz when I press the button to drop it it does, but when i press the "Addon Hardpoint Relay" button nothing happens. Is that a problem with the droptank or is it not the right button. Thanks for your time in advance, and congrats for building the most OP heli ever.
WH1T3_No1SE  [ผู้สร้าง] 26 ม.ค. 2023 @ 4: 36pm 
It does show it instead of addon text, on same part as the clock, if it doesn't then you are just pasting it wrong.
The Busted Nut 27 ส.ค. 2022 @ 1: 52pm 
Doesn't show remaining level on 1x3 display.
The Busted Nut 23 ส.ค. 2022 @ 3: 47pm 
Doesnt show remaining level on center 1x3 display.