Trang cửa hàng
Stormworks: Build and Rescue
Tất cả Thảo luận Ảnh chụp Tranh ảnh Phát sóng Video Workshop Tin tức Hướng dẫn Đánh giá

Stormworks: Build and Rescue

Trang cửa hàng
Stormworks: Build and Rescue >  Workshop > Workshop của ElfBossHogg
25 lượt đánh giá
SBS Cargo Car MK2
Mô tả Thảo luận0 Bình luận2 Ghi chú thay đổi
   
Giải thưởng
Yêu thích
Đã yêu thích
Bỏ thích
Vehicles: Vehicle, Exploration, Delivery, Technical, Creative, Land, Mechanical, Advanced
Nhãn: v1.6.2
Kích cỡ file
Đã đăng
Đã cập nhật
1.142 MB
30 Thg07, 2022 @ 1:30am
16 Thg10, 2022 @ 1:09pm
3 ghi chú thay đổi ( xem )
Tạo bởi
ElfBossHogg
Rời mạng
Xem tất cả 164 bộ sưu tập tạo bởi ElfBossHogg và những người khác (một số có thể bị ẩn)
5,466 Số khách thăm độc nhất
9,182 Người đăng ký hiện tại
67 Lượt yêu thích

Đăng ký để tải xuống
SBS Cargo Car MK2

Trong 2 bộ sưu tập tạo bởi ElfBossHogg
Stormworks - SBS (SeaBoss Systems) - Vehicle Collection
57 vật phẩm
Stormworks - SBS (SeaBoss Systems) - Train Collection
13 vật phẩm
Mô tả
SeaBoss Systems (SBS) Cargo Car to match the PUMA MK1/MK2 High Speed Trains (HST)


If you are running the PUMA MK2 HST you can activate the Power Assist Motors in the car to assist with speed control...
    On each Cargo Car as you top the stairs after you enter the Front doors there will be a orange control panel on the left side of the train. There are two buttons, a radial segment, a requested speed indicator and a number pad specifically assigned to this panel.
  1. Ensure that the train number set by your number pad matches the train set number of the Master Engine (HST). By default the number will be 222 (if the number pad is left as 0). This number is reflected on the display panel on the outside of the train and the panel visible to the interior seating section. All of the SBS train elements in your "chain" should have the same number.
  2. Click on ACTIVATE ASSIST MOTORS, this will light up the top part of the radial segment as green. This will activate electrical motors on the car which are powered internally by batteries but recharged by the hitch connection to the main train engines. If there is a Master Engine present the two centre radials will light white indicating a positive integration. The motors will automatically adjust in order to assist in bringing the entire train to the requested speed as defined by the Master Engine (HST)
  3. If the train car is pointing opposite the direction of the currently defined Master Engine (HST) then click the REVERSE DIRECTION button, this will light up the bottom part of the radial segment as yellow. This is necessary to ensure that the wheel spin direction reflects the proper direction as defined by the Master.

NOTE: Each train engine should be able to provide enough electrical power generation to power 1.5 additional cars. Ideal setup is 1 car with ACTIVE ASSIST per engine in order to acquire max speed.



LINK for PUMA MK1 High Speed Train -> https://steamproxy.net/sharedfiles/filedetails/?id=2087793425

LINK for PUMA MK2 High Speed Train -> https://steamproxy.net/sharedfiles/filedetails/?id=2841449190


FORKLIFT USED IN THE SCREENSHOTS...
MAFI MF1500
https://steamproxy.net/sharedfiles/filedetails/?id=2826976411
2 bình luận
< >
HeatSeas 15 Thg10, 2023 @ 6:46am 
how do i use the master and slave thing isnt the main train supposed to be master and the one in the back slave?
Davis 14 Thg08, 2022 @ 7:12pm 
Nice!