Stormworks: Build and Rescue

Stormworks: Build and Rescue

Pas assez d'évaluations
[FLOLS] Fresnel Lens Optical Landing System
   
Récompenser
Ajouter aux favoris
Favoris
Retirer des favoris
Taille du fichier
Publié le
Mis à jour le
71.339 KB
2 mars 2022 à 3h07
4 mars 2022 à 20h16
3 notes de changement ( voir )

S'abonner pour télécharger
[FLOLS] Fresnel Lens Optical Landing System

Description
Camelot 401, Three quarters of the mile, call the ball.

Camelot 401, Phantom Ball, State 4.2
----------------------------
These are the words spoken by any naval pilot on their final approach.

With this FLOLS System, you too, can call the ball.
---------------------------
Features:

Accurate +/- 2 Degrees glide slope calculation
Precise landing spot capability
Pitch Stabilised
LSO Control Panel featuring Wave-off Lights control
---------------------------
Set Up Guide:
Paste into your creation of your choosing. If using an angled deck, place the FLOLS assembly on a pivot and rotate it such as it faces the same direction as the angle.
Move the red painted logic components (Altimeter, GPS) to directly beneath where you want aircraft to land. On aircraft carriers, I would recommend the 3 Wire.
Move the LSO Control Panel (Dark grey box with buttons) To anywhere you want, I recommend somewhere with good sight lines of the final approach and the arrestor wires.
Make sure all main bodies are merged with your ship, and that the system has electrical power. (The battery beneath the LSO control panel is wired to everything, merely add a connection there)
-OPTIONAL-
Connect the "Foul Deck" Logic node on the back of the LSO Control panel controller to the connectors that catch the aircraft, this will flash a red light on the panel telling the LSO that the deck is currently not safe to land.
Change the glide slope to a value you want. The default is 9 degrees. If you change this, you will also need to change the gauge on the LSO Control panel. The minimum should remain at (0) and the maximum can be calculated using x*2 where x is the new glide slope angle.
---------------------------
Use Guide:
Set the Transponder Code to the same code as the aircraft is broadcasting on (See: Required Items: Aircraft XYZ Transponder)
Turn on System Power.
Ensure landing area is clear.
Aircraft is now clear to land.
---------------------------
Absolutely GARGANTUAN Thanks to Trapdoor on discord for being a huge help with the maths behind this.
---------------------------
FLOLS: Fresnel Lens Optical Landing System
LSO: Landing System Officer
6 commentaires
dinkledonkler  [créateur] 5 mars 2022 à 23h51 
ok
train06boy 5 mars 2022 à 22h22 
no
dinkledonkler  [créateur] 5 mars 2022 à 19h44 
What did you expect? Its a complex piece of equipment that is incredibly simple once installed.
train06boy 5 mars 2022 à 12h00 
lots to do just to get it lol
dinkledonkler  [créateur] 4 mars 2022 à 20h17 
Fixed broken antennae. If using on your creations, please connect the numpad to the antenna behind the lights display.
JudgementalBird 4 mars 2022 à 9h13 
!!!!!!! yucky and trap going sicko mode?