Abonner for at downloade
ENDAIR AN-225 Mriya

The AN-225 Mriya was the biggest aircraft in the world!
It recently was destroyed by the Russians in the missile strike that took place at its home airport...
it had 214 national and 124 world records, including the transportation of the heaviest payload ever airlifted, at 253,820 kg!
has a Top speed of 260Knots, has a range of over 2000KM and can lift up to 300.000 Kg!

it has a huge cargo hold for Cargo Transport that can hold up to 4 EndairCargo Containers!
or you can make your own 4 modules to load the plane with the Custom Pallet!

Get the latest updates about my plane projects on my discord server! :
url=https://discord.gg/8YrrV9YJHM

If you want to support me you can donate from this link :

https://www.paypal.com/paypalme/enderpilot

NOTE: PLEASE DO NOT MODIFY OR RE-UPLOAD THIS VEHICLE

[Requires modded workbench or custom mission to spawn]

Loading/Unloading

If you are using the existing pallets just attach the ropes to the aircraft's crane and pull it into the aircraft
Once its positioned on top of the orange lines you can activate the containers magnets and secure it

OR

You can bring whatever vehicle you want!
But make sure it has rope connectors on all of its sides so you can secure it with ropes on the floor!

STARTUP PROCEDURE:

1. Open Navigators Panel Electrical
2. Open Engineers Panel Electrical
3. Open Flight Deck Electrical
4. Open Electronic Avionics Power
5. Open Engineers/Navigators Backlights (If needed)

6. Open APU Fuel Pump
7. Open APU Fuel Cutoff
8. Open APU Starter
9. Confirm APU is starting up

10. Open all ENG Fuel Cutoffs
11. Open all ENG Fuel Pumps
12. Open all ENG Electrics
13. Open Hydraulic systems : A, B, C

14. Open APU Bleed
15. Open ENG 1 Starter
16. Confirm it stabilizes on the Dial panel
17. Repeat for ENG 2, 3, 4, 5, 6
18. After Takeoff, Shutdown the APU

Navigators Panel:

The navigators panel is equiped with Radiocommunication
a small gps minimap with the Y and X position of the aircraft
Along with an interceptor!

MULTYPOINT AUTOPILOT SETUP:

Tip Take a moment before takeoff to input your desired coordinates and Altitude to the aircraft!

1. Set up your waypoint coordinates on the Autopilot Coordinates Panel
2. Press Instert a Waypoint
(If you want you can add up to 8 waypoints)
3. Enable F/D
4. Engage AP

ALTITUDE SETUP:

1. Set up your desired Altitude on the Altitude Hold Panel
(To increase altitude faster press: Switch Alt to 100 Increase)
2. Enable F/D
3. Press the ALT HOLD Button

THROTTLE:

[130 Takeoff] [130-120 Cruise] [75-70 Land] [5-2 Taxi]

CREDITS

Shairo-jp : 1x1 AH
Kaus Bumsen : 1x1 Fuel info Display
MrNJersey : NJ 1x1 GPS Map with Pointer

Consider leaving a Rating and a Comment if you like the creation.
If you find any Bugs please report them down below