Sottoscrivi per scaricare
F-35A USAF (base)

United States Air Force painting
My ordinance collection : https://steamproxy.net/sharedfiles/filedetails/?id=2655522690
Preset of ordinances: https://steamproxy.net/sharedfiles/filedetails/?id=2620823773

almost 1:1 scale. (real scale)
Length : 15.75m (15.61m)
Width : 10.75m (10.67m)
Height : 4.5m (4.36m)

range : 500km (cruise), 200km (full throttle)
max speed : 279knot
It has 200 ammo LAC and 4 chaffs, air to air refueling port, arresting hook(mag).

• Axis
  a/d : roll
  w/s : pitch
  left/right : yaw
  up/down : throttle
  
• Mouse Control
  Level is updated when you activated mouse control mode ([2]key).
  Alt hold and heading hold are unavailable.
  a/d : roll
  w/s : throttle
  look X : yaw
  look Y : pitch
  
• Flight assist
  You can see "{}" sign on the HUDs if they are active.
  Horizontal hold : When this function is active and you push neither [a]key nor [d]key, it keeps horizontal.
  Altitude hold : When this function is active, it holds altitude and you can change the setpoint by pushing [w]key(descent) or [s]key(climb).
  Heading hold : When this function is active and you push neither [left]key nor [right]key, it keeps the last pushed direction.
  Fix heading : You can fix target heading by keypad A value (0~360degrees). Touch (A) button on the biggest screen to update.
  
• Trim
  You can fix Rudder angle by switching the trim flip switch on the right panel.
  
• Reverser
  When it is idling, it can go forward or back by ducted fan power.
  Just press throttle key while idling to use it.

You can switch map, fcs and assist, camera by touching bottom white lines.
Map explanation : https://steamproxy.net/sharedfiles/filedetails/?id=2730476986

You can select an ordinance by touching monitor. (White or dark gray 4px lines are selectable.)
You have to switch Master arm switches on the center panel to use selected hardpoint ordinances.
You have to switch Jettison or Jettison all switches on the center panel to release hardpoint ordinances.
You can use it by pushing trigger key.
Hold select : Touch HOLD button on the monitor to hold selection (hardpoint only).
Open bay : Touch BAY button on the monitor to open or close weapons bay manually.
Auto select : If it has a same ordinance, the fcs automatically changes hardpoint.
Click here if you'd like it to recognize any ordinance other people made.

Any ordinances can be launched without any remodeling.
It can launch any missiles or bombs made by other people.
It launches ordinance if the Ordinance Type is set "Unguided Bomb", "Laser Guided Bomb", "GPS Guided Bomb", "Rocket", "Laser Guided Missile", "GPS Guided Missile", "Radar Guided Missile", "Torpedo".
If hardpoint composite doesn't follow my FCS rules, disconnect the node or it doesn't work.
Auto switch is unavailable without remodeling to put an attachment below.
Amount indicator isn't available, too.

• Sending from the FCS
  On/Off 1:master arm, 2:trigger
  
• Return from an ordinance
  Number 1:ID, 2:current amount, 3:max amount
  On/Off 1:Active or not, 2:Ready or not, 3:Launch, 4:Lockable or not
  
• Rules
  Empty ID is 34~. (You can add more)
  Current amount and max amount must be at least 1.
  Detail : https://steamproxy.net/workshop/filedetails/?id=2655522690

You can see some information at 1*1 monitors.
You can change the visible information by touching small lines at the bottom of the monitors.
Detail : https://steamproxy.net/sharedfiles/filedetails/?id=2731055048

1. Fuel consumption and range, remaining time.
   
2. Simple radar. You can change display range.
   
3. Radar detector warns when the it detects 3sec constant radar wave. You can deactivate alert.
   
4. Beacon detector shows estimated beacon distance.
   
5. Map. It can zoom and scroll.
   
6. Camera : You can switch forward cam or bottom cam.

center HUD : https://steamproxy.net/sharedfiles/filedetails/?id=2136926352

Repaint is OK !
Re-uploading needs my permission ! Please contact me before uploading !