다운로드 위해 구독하기
SE Scooter

Vanilla | No Mods | Script | 2 DLC (optional)

Designed for printing small grid support ships and transporting goods weighing up to 35 tons in space. Can be moved through sliding doors inside the ship. Turns on and off with one button. Has everything you need for remote control.

Specification:

PCU: 520
Blocks: 61
Weight: 4200 kg
Thrust: 35 tn
Size (LWH): 3 x 1.5 x 2.25 m

1 Pilot seat
2 Small Reactor
1 Small Battery
1 Gyroscope
2 Programmable blocks
1 Remote Control
3 Projecor
1 Antena
1 Camera
1 Magnet plate
7 Small Ion Thrusters

Control pad #1

#1 - turn scooter on/off*
#2 - override gyroscope on/off
#3 - switch thrusters on/off
#8 - camera view
#9 - switch magnet plate status

* the scooter is turned off if the magnetic plate is ready for docking

Scripts

Projector Aligner Script (unofficial patch)
Unnoficial modification of the Easy Automatition 2.0 script

The projectors are controlled via digital panel #2. Before loading the blueprints you need into the projectors, you should disable the ability to move the ship. To do this, turn on the interception of gyro control with the button #8 and turn off the thrusters with the button #9.

Then, using the buttons #1 and 2, select the required projector in the menu and press the button #3. Then, through the control panel, load the required blueprint from the workshop and align it using the WASD keys and the mouse so that the steel plates installed in front of the scooter activate one of the drawing blocks to start welding. Then turn off the control PB for the projectors with the button #4 and restore the ability to move the ship.

The blueprints have already been loaded into the scooter's projectors: T-Technic, T-Truck,
T-Fighter that can be printed with a 1x5 welding wall (see screenshots). You can upload your blueprints and use a different size welding wall, but the weight of the printed grid should not exceed 35 tons.