To hack a network, the only thing you'll need is skybreak which you can buy from zeroday for 8D

Wait for it to finish installing and then we can move onto the next step:

Once skybreak has finished installing, double click it to open. You should see something like this:
Now let's find a network to crack. Click on the wifi icon in the top right to see available networks:


Since you just installed skybreak, the only wifi network type you can hack is WEP.

Head into skybreak and type 'WEP' into the console like so:
After that, type 'scan' and skybreak will start scanning for nearby networks:

Once the scan is done, you should see a list of networks that skybreak has found. Now let's move onto the next step which is probing and cracking

Once the scan is complete, type 'probe' but DON'T press enter yet. In the example below, i am cracking the network 'D59709' type the BSSID of the network you want to crack like shown below then type space and then '1 1000' which is the port start and port end:
If you've done it correctly, you should see something like this which indicates the probe is currently at work:

Wait for the probe to finish and we can crack the network.

After the probe has finished, type 'crack' and then the BSSID followed by the CH number of the network, usually it's 8 for WEP networks I think. then type the open port number which is shown just above the line that you are typing in and hit enter. In the example below, the open port for me was '716':
once after you hit enter, skybreak will then start testing keys. Wait for it to finish and you should see something like this:
You see that password found notice? Next to it is the password for the network you just cracked. click on the wifi icon in the top right again and click the network you cracked, then type the password like shown below:
After that, click connect and BAM! you're connected to the network. congratulations! i hope you found this guide helpful, feel free to give feedback in the comments if you liked it or disliked it