欢迎各位留言提出建议由于我是懒狗，所以随缘更新翻译[手动doge]

在游戏中，可以通过“~”键打开控制台（Esc键下方），再次使用“~”键可关闭控制台。打开以后，控制台的显示内容将出现在屏幕下方。

1.如果显示内容较多，无法全部显示时，可以通过"Page Up" 和 "Page Down"两个键实现翻页，查看所有信息。

2.控制台命令不区分大小写。例如：tai=TAI=tAi=TaI，这些输入方法的实际效果是完全一致的。

3.控制台代码前面的 0 可以略去不打 如金钱代码 0000000f 和 f 是一样的。

4.部分命令存在缩写，无论全称或者缩写，控制台都可以正常识别，例如：tai=toggleai；setav=setactorvalue，这些命令是完全等效的。

5.许多控制台命令需要指定一个目标：如果某个命令是针对玩家角色本身的，那么你必须使用“player.具体命令”，使得该命令对自己生效。 例如：player.setav carryweight 1000 ，这个命令可以自己的负重增加到 1000 点，或者，你可以点击自己【控制台界面上方显示‘00000014’ (为玩家自身代码，复制出来可以对打)】，输入 setav carryweight 1000，两条命令的实际效果其实是一样的。如果打开控制台，点击面前的莱妹（控制台界面上方显示‘000A2C94’），输入 setav carryweight 1000，此时，命令就会对莱妹生效，她的负重将会增加到 1000 点。

6.关于 RefID 与 BaseID
NPC 和生物等通常有 RefID 和 BaseID，物品则只有BaseID。RefID 指在游戏中实际工作的对象，大多数游戏脚本使用 RefID 控制 NPC，适用于 enable、disable、prid、resurrect 等命令。应用于与现有的对象进行交互、对现有的对象进行定位或修改，点选 NPC 即可查出。BaseID 指不可改变的原型或模板对象，适用于 placeatme 等命令，应用于生成一个对象的新副本，用 help 命令可查出。 所有物品，任务，NPC，地点的映射 ID 和基础 ID 都可以通过 UESP 的对应页面进行查询。

如果您使用的是非美式键盘，波浪号（tilde、~）或者重音符又叫反引号或反单引号（`）可能不起作用, 也有可能没有带此类标记的按键。通常，the correct key to use is the key below Esc and above Tab (↹), where the tilde/grave key is on a US keyboard。详见下表：:
Another possible solution is to install AutoHotKey[www.autohotkey.com] and set up a shortcut to send the tilde key code the game is expecting. Add the following lines to your AutoHotKey script and it will map F12 to grave accent (`) and Shift+F12 to tilde (~). (The grave accent key is the same physical key as tilde on US English keyboards.)
On some systems you may need to use the less optimal mapping:
The Console key can also be remapped by editing the file located in Data\Interface\Controls\PC\ControlMap.txt. By default the Console key is assigned the value 0x29 (DIK_GRAVE), changing to 0xb8 will assign it to the "Right Alt" key (DIK_RMENU). See a Direct Input Key （♥♥♥） Code Table for other keys.

注:常用命令均已加下横杠并已加粗变蓝

这些命令必须首先指定一个合适的目标，否则无法正常执行！或者也可以用
“player.XXX”来指定自己作为目标。

PS：steam这个东西竟然有字数限制，真的是fo了

Skyrim provides a simple batch file mechanism so you can customize your game play quickly and without repeatedly typing console commands.

bat mybatchfile; runs all of the console commands in the file Skyrim\mybatchfile or Skyrim\Data\mybatchfile.txt. Notice that the file you put in Skyrim directory mustn't have an extension, while the one in Skyrim\Data needs a .TXT extension. The second option is preferable - first because you don't need to change file extension and second because it keeps the root directory clean. Also a file that goes to Data folder can be shipped along with mod and placed by all Mod Managers.

To use the feature you:

·Create a text file that contains a list of console commands (one per line).
·Place the file in your Skyrim installation directory or in Skyrim\Data.
·Start the game.
·Bring up the console.
·Type bat followed by the name of your batch file, for example bat mybatchfile.

Skyrim batch files are lists of console commands that are run one after the other. They have no loops, tests, or other logic and execution doesn't stop if there's a problem with one of the commands. You can create any number of batch files, each with its own purpose.

Most Skyrim console commands can be run from a batch file. For example:

·Toggle commands work in batch files. These include showing and hiding NPC conversation subtitles (ShowSubtitle), turning on and off grass display (TG), enabling and disabling god mode (TGM), and so forth.
·Targeted commands with an explicit reference work fine. For example, you can use Player.Additem f 1000 in a batch file to add 1000 gold to your inventory. If you want to give Lydia 1000 gold, use A2C94.Additem F 1000 (A2C94 being the Reference ID of Lydia).
·PRID (Pick by Reference ID) selects an item, NPC, etc. Using PRID to select an NPC before performing additional commands that you want to apply to that NPC works fine, for example prid a2c94 then setclass 13176 will cause Lydia to level up correctly.
·Miscellaneous commands such as FOV or FW can also be run from batch files.
·The COC command cannot be run from within a batch file (the game will crash to desktop). (verification needed — see talk page[en.m.uesp.net])


With the above method you can actually create an alternative start to the game. In addition to a batch file, you also need to edit the Skyrim.ini file, which can be found in your C:\Users\YOUR_USER_NAME\Documents\My Games\Skyrim folder.

1.Open your Skyrim.ini file and add the line SStartingCell=WhiteRiverWatch01 under the [General] tab.
2.Adding this line causes Skyrim to bypass the Continue - New - Load - Credits - Quit screen, and starts a new game - without the prisoner video sequence. Once you have created a new character, you will need to remove it again.
3.Create an empty .txt file in your Skyrim folder (where the TESV.exe is located) and name it bandit (or bandit.txt in the Skyrim\Data folder).
4.Paste the code sniplet below the numbered list into the new file.
5.Start a new game and you will not see the intro, and will begin in the White River Watch cave.
6.Open the console and type bat bandit.
7.Create your character.

Code to copy into the bandit[.txt] file:

onehanded 单手武器
twohanded 双手武器
alteration 变化系
conjuration 召唤系
destruction 毁灭系
enchanting 附魔
illusion 迷幻系
restoration 回复系
marksman 箭术
block 格挡
heavyarmor 重甲
smithing 锻造
alchemy 炼金术
lightarmor 轻甲
lockpicking 开锁
pickpocket 偷窃
sneak 潜行
speechcraft 口才

Health 生命值
Magicka 魔法值
Stamina 耐力值
HealRate 生命值回复速率（默认值 0.7%）
MagickaRate 魔法值回复速率（默认值 3.0%）
StaminaRate 耐力值回复速率（默认值 5.0%）
SpeedMult 移动速度（默认值 100%）
Shoutrecoverymult 龙吼 CD（数字代表 CD 时间为原来的倍数，0 为无 CD，
0.5 为一半，1 为默认值，2 为双倍）
Dragonsouls 龙魂数量
CarryWeight 负重
CritChance 暴击概率

ArgonianRace 亚龙人——ArgonianRaceVampire 亚龙人吸血鬼
BretonRace 布雷顿——BretonRaceVampire 布雷顿吸血鬼
DarkElfRace 黑暗精灵——DarkElfRaceVampire 黑暗精灵吸血鬼
HighElfRace 高等精灵——HighElfRaceVampire 高等精灵吸血鬼
ImperialRace 帝国人——ImperialRaceVampire 帝国人吸血鬼
KhajiitRace 虎人——KhajiitRaceVampire 虎人吸血鬼
NordRace 诺德人——NordRaceVampire 诺德人吸血鬼
OrcRace 兽人——OrcRaceVampire 兽人吸血鬼
RedguardRace 红卫人——RedguardRaceVampire 红卫人吸血鬼
WoodElfRace 木精灵——WoodElfRaceVampire 木精灵吸血鬼

注：本章为自主添加

从2021年4月9日开始写更新日志，此前先后大约有5到6次更新，均未写在此(懒)

---

2021/4/9/01/29：将所有命令全部码完，所有命令的章节数直接加了9章手在痛

---

2021/5/8/19/32：更新排版，将所有常见命令文本修改成标题文字的形式，方便查阅和复制粘贴，原来的横线依然有懒得删

---

2021/5/8/19/57：已将所有命令移到最下方，因为这玩意儿实在没人怎么看，没什么用

---

2021/6/30/17/13：加了一点翻译

---

很多东西没什么屌用，原址是默认隐藏的，看一乐就好了，直接不用管